Failed to create a file system
TimoEck opened this issue · 4 comments
Hey,
I'm a beginner. It's my first try to change my Linkstation System to Nextcloud.
The first step is to install ubunto. I followed https://www.youtube.com/watch?v=dfMHlLmsSF8. By Side I checked the wiki (https://github.com/1000001101000/Debian_on_Buffalo/wiki) and followed the way with Option 1: Load onto Device Running the Stock Firmware.
Now I tried to install the ubuntu. Followed the partion advices in the video and set the partions this way:
My next Screen and choosed option:
Next Screen:
And after a while (<1min) Don't be scared my cmd at windows doesn't show right at this install process:
If you need additional information about my system or my installation please let me know.
additional:
I want to get Raid1. I don't know how to reach this and can I do it now with the partion or later?
sda6 and sdb6 are components of RAID#10. if you change those to unused it should be able to move forward.
you can specify a mountpoint for RAID#10 if you wish or you can wait till after you get into debian
Hello, thank you so much for your fast responde!
Sorry for my Questions. But I got the RAID#10 "use as: do not use"
If I change RAID#10 to ext4 and the mountpoint to: "/home", will it save all files there
or should I "use as: do not use" for both 2TB Hard Drives?
I changed RAID#10 to ext4 and tried to set the mountpoint to /mnt/data.
Changed the filesystem sucessfully, but gave me the same error. "The ext4 file system creation in partition #6 of SCSI1 (0,0,0) (sda) failed.
EDIT: I tried your second advice. To unused the 2 disks. Now I'm at the "installing base system".
Worked. Debian is installed. Thank you very much for your help!