SimpleVoxelViewer doesn't work on Linux with error 'Could not read register for address 0x5400'

[fanwei-seiriosai]

SimpleVoxelViewer show error message as below:
ERROR: USBIO: Control transfer issue: Status 0.
ERROR: VoxelUSBProgrammer: Could not read register for address 0x540.
ERROR: VoxelProgrammerBase: Could not read register for address 0x5400.
ERROR: DepthCamera: Failed to update value for parameter 'comp_vref'.
Same device work well on Win10.

• The below is output message.

./SimpleVoxelViewer 0

mmmmmmmmmm,21504
ERROR: USBIO: Control transfer issue: Status 0
ERROR: VoxelUSBProgrammer: Could not read register for address 0x540
ERROR: VoxelProgrammerBase: Could not read register for address 0x5400
ERROR: DepthCamera: Failed to update value for parameter 'comp_vref'
mmmmmmmmmm,21504
ERROR: USBIO: Control transfer issue: Status 0
ERROR: VoxelUSBProgrammer: Could not read register for address 0x540
ERROR: VoxelProgrammerBase: Could not read register for address 0x5400
ERROR: DepthCamera: Failed to update value for parameter 'comp_vref'
mmmmmmmmmm,21504
ERROR: USBIO: Control transfer issue: Status 0
ERROR: VoxelUSBProgrammer: Could not read register for address 0x540
ERROR: VoxelProgrammerBase: Could not read register for address 0x5400
ERROR: DepthCamera: Failed to update value for parameter 'comp_vref'
ERROR: CameraSystem: Could not refresh parameters for TintinCDKCamera(0::0451:9105::12018081200031).

_dealiasedPhaseMask = 0, _dealiasedPhaseMaskInPhaseOffset = 4
ERROR: USBBulkStreamer: Dropped frames 1 Valid frames 0 0 307200
ERROR: USBBulkStreamer: Dropped frames 2 Valid frames 0 0 307200
ERROR: USBBulkStreamer: Dropped frames 3 Valid frames 0 0 307200
ERROR: USBBulkStreamer: Dropped frames 4 Valid frames 0 0 307200
ERROR: USBBulkStreamer: Dropped frames 5 Valid frames 0 0 307200
ERROR: USBBulkStreamer: Dropped frames 6 Valid frames 0 0 307200
ERROR: USBBulkStreamer: Dropped frames 7 Valid frames 0 0 307200
ERROR: USBBulkStreamer: Dropped frames 8 Valid frames 0 0 307200