Unable to install on Ubuntu 22.04
Closed this issue · 12 comments
Trying to install it on Ubuntu 22.04 using the command mentioned in the README, no errors just doesnt do anything
screenshot of the output
Same for debian-bullseye
Do You found any solution?
I am trying to install https://gitlab.com/rswat09/gamebuntu where una is a requirement.
Here some debug output for the developer:
+ gpg --dearmor
+ wget -qO - https://proget.makedeb.org/debian-feeds/makedeb.pub
+ sudo tee /usr/share/keyrings/makedeb-archive-keyring.gpg
+ echo 'deb [signed-by=/usr/share/keyrings/makedeb-archive-keyring.gpg arch=all] https://proget.makedeb.org makedeb main'
+ sudo tee /etc/apt/sources.list.d/makedeb.list
+ sudo apt-get update
+ sudo apt-get install makedeb
+ git clone https://github.com/AFK-OS/una
Cloning into 'una'...
remote: Enumerating objects: 213, done.
remote: Counting objects: 100% (6/6), done.
remote: Compressing objects: 100% (6/6), done.
remote: Total 213 (delta 0), reused 1 (delta 0), pack-reused 207
Receiving objects: 100% (213/213), 52.48 KiB | 1.42 MiB/s, done.
Resolving deltas: 100% (112/112), done.
+ cd una
+ bash -x ./una update
++ tput bold
+ bold=''
++ tput sgr0
+ normal=''
+ red=''
+ green=''
+ yellow=''
+ blue=''
+ magenta=''
+ cyan=''
+ version=v3.2.0
+ set -e
+ echo 'una v3.2.0'
una v3.2.0
+ [[ 1000 == \0 ]]
+ LOCKFILE=/tmp/una.lock
+ [[ -e /tmp/una.lock ]]
+ trap 'rm -f /tmp/una.lock; tput cnorm; exit' INT TERM EXIT
+ echo 69509
+ [[ ! -d /var/lib/una ]]
+ echo
+ info 'creating una directory and config files'
+ echo -e '>> creating una directory and config files'
>> creating una directory and config files
+ mkdir -p /home/jonas/.config/autostart
+ cat
+ cat
+ sudo tee /etc/una/config
+ rm -f /tmp/una.lock
+ tput cnorm
+ exit
+ bash -x ./una install una-bin
++ tput bold
+ bold=''
++ tput sgr0
+ normal=''
+ red=''
+ green=''
+ yellow=''
+ blue=''
+ magenta=''
+ cyan=''
+ version=v3.2.0
+ set -e
+ echo 'una v3.2.0'
una v3.2.0
+ [[ 1000 == \0 ]]
+ LOCKFILE=/tmp/una.lock
+ [[ -e /tmp/una.lock ]]
+ trap 'rm -f /tmp/una.lock; tput cnorm; exit' INT TERM EXIT
+ echo 69520
+ [[ ! -d /var/lib/una ]]
+ echo
+ info 'creating una directory and config files'
+ echo -e '>> creating una directory and config files'
>> creating una directory and config files
+ mkdir -p /home/jonas/.config/autostart
+ cat
+ cat
+ sudo tee /etc/una/config
+ rm -f /tmp/una.lock
+ tput cnorm
+ exit
+ una help
./install.sh: line 16: una: command not found
Hey guys, I got a little obsessed with this last night and figured a few things out. Firstly I reverted back to 3.1.1 on this github. It created a secondary problem which I fixed as well. I'm not sure if this is stable in the long term but currently I haven't run into any problems.
Instructions:
Install Una via the install.sh script or via makedeb una-bin
Download the 3.1.1 repo
overwrite bin/bash una & una-updater w/ the 3.1.1's version
This will remove the whole creating directory stuff but will cause a new issue where you can't install because it won't find PKGBuild when using "Una Install Package"
To fix this I went into una's bin and deleted all ".git". Note do not remove -git just .git. It'll fix the install problem and everything will work as intended.
I will try this out
This issue should be fixed now (I've updated the install script).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Cloning into 'una-bin'...
fatal: repository 'https://mpr.makedeb.org/una-bin.git/' not found
[!] PKGBUILD does not exist.
/proc/self/fd/11: line 15: una: command not found
/proc/self/fd/11: line 15: una: command not found
still not working @RudraSwat
should be working without the .git at the end
Mhm the same problem, now that i've removed the .git. The same neverending "creating una directory and config files"
The issue still persists installation fails
Same here..
