This project contains different configuration files for the Pacsat Hardware. You should clone this project along side the PacSatSW project. Use the install.sh script to swap from one hardware configuration to the other. It has the following format:
Usage: install.sh [launchpad|blinky] <install-dir>
Where launchpad and blinky are two folders in this project containing the hardware files. install-dir should be something like ../PacSatSW or whatever the path is to the Pacsat project.
There is some basic error checking to make sure that the destination folder contains an hcg folder, but otherwise it just copies in the needed files.
To use the launchpad you must then edit the config.h in the Pacsat software repo and set #define LAUNCHPAD_HARDWARE
In the future we can add other defines if needed. For now defining this specififes the launchpad. Otherwise the blinky board is assumed.
Pushes to the main branch should use the blinky hardware as that is the default.