Abdallah-sabbah's Stars
Andreas-Menzel/BatterySoCMonitor
Monitor the batteries state of charge and approximate the total battery capacity in hours.
signaloid/Signaloid-Demo-Batteries-StateOfChargeEstimation
This example shows how uncertainty in the battery discharge current measurement leads to uncertainty in the battery state of charge (SoC) estimation for different SoC estimation methods.
mspiceland/wireless-battery-monitor
Android Bluetooth wireless battery monitor (prototype)
duerrfk/BLE-V-Monitor
BLE-V-Monitor is a battery voltage monitor for vehicles (cars, motorbikes). It consists of an Arduino-based monitoring device and an Android app.
sfgit/ESP8266-01-BREAKOUT
ESP8266-01 Breakout Board
vigasan/FCBoardTest
The project of a custom board based on ESP32 with 2 16A relays, on board power supply, I2C pins and Uart for esternal sensors, 2 programmable buttons and RGB led. The board has an USB connector to program ESP32.
embeddedlab786/IOT_Control_4Load_Firebase
IOT_Control_4Load_Firebase
ashishvegan/Home-Automation-IoT-NodeMCU-MITAppInventor
Arduino Program for IoT based Home Automation using Android Application, Google Assistance & NodeMCU(ESP8266)
xoseperez/espurna
Home automation firmware for ESP8266-based devices
domoticz/domoticz
Open source Home Automation System
SamZorSec/Open-Home-Automation
Open Home Automation with Home Assistant, ESP8266/ESP32 and MQTT
tvixen/4KW-230V-Inverter
With these schematics and PCB's, it's possible to create a 230V AC 4KW inverter. The main processor is based on Arduino Nano, with help from a graphic processor Arduino Mega2560, to run the demanding graphic and interface to front buttons.
fabe1999/ScreenShare-WS2812b
Display your Screen on a WS2812b LED Matrix
HighVoltages/Mqtt-in-Android-app---mit-app-inventor
In this tutorial we will implement MQTT in Android application using drag and drop programming blocks in MIT App inventor.
DieBieEngineering/DieBieMS
Electric skateboard oriented battery management system.
pho/esp32-lifepo4-board
Kicad pcb design of a minimal board with an ESP32 and a LiFePo4 charging circuit
philippedc/Li-ion-LifePo4-BMS-charger-tester-for-Arduino-Uno
Here is an universal 1S to 4S BMS charger/tester either for Li-ion or LifePo4 cells buit arround an Arduino Uno
FransVeldman/OpenHybridBMS
Arduino based BMS for lead-acid/LiFePO4 hybrid systems tailored for long term off grid sailing boats
stefanandres/bms-monitoring-stack
Green-bms/SmartBMS
Open source Smart Battery Management System
simple-ee/mBMS
This is the modular BMS for use with 8S LiFePO4
ShreyasMaitreya/Battery-Management-System
BMS capable of SOC/SOH determination, passive cell balancing, over voltage, over current and over temperature protection determination using Arduino and BQ769X0 ICs. Make connections as per datasheet of BQ 769X0 IC.