CMAQ5.3 ERROR: Surrogate Species PAL on emission stream 1 has units G/S\00\00\00\00\00\00\00\00\00\00\00\00\00 which are unkown to CMAQ
Closed this issue · 1 comments
``hi,MEIAT-CMAQ administrator:
I have been using this tool for two weeks now, but it took me over a week to find the cause of the error. I am very distressed because I have been encountering the same error all along:
|> Checking Emissions Surrogate Units:
======================================
*** ERROR ABORT in subroutine CHECK_EMIS_UNITS on PE 000
ERROR: Surrogate Species PAL on emission stream 1 has units G/S\00\00\00\00\00\00\00\00\00\00\00\00\00 which are unkown to
CMAQ. Please correct them to proceed.
PM3EXIT: date&time specified as 0
Date&time specified as 0
I strictly followed the case study: 使用2017年的MEIC清单制作珠三角的排放文件
MEIC download:
输出时间分辨率设置逐月
输出排放部门设置5部门
输出空间分辨率设置兰伯特投影
第一标准纬度:25度, 投影中心纬度:34度,
第二标准纬度:40度, 投影中心经度:110度,
左下角横坐标:-3096000米,
左下角纵坐标:-2286000米,
X方向分辨率:36千米, Y方向分辨率:36千米,
X方向网格数:172个, Y方向网格数:127个
物种SO2,NOx,CO,NMVOC,NH3,PM10,PM2.5,BC,OC
输出VOC化学机制设置CB05
namelist.input
&global
griddesc_file = "input/GRIDDESC.22"
griddesc_name = "20181201_cd"
big_grid_file = "shapefile/MEIC-0P25.shp"
geotiff_dir = "Z:/AAATOGETER/tif"
inventory_label = "MEIC"
inventory_year = "2018"
sectors = 'transportation', 'residential', 'power', 'agriculture', 'industry'
allocator = 'line', 'landscan-global-2017_nodata.tif', 'power.tif', 'agriculture.tif', 'industry.tif',
allocator_type = "line", "raster", "raster", "raster", "raster"
inventory_mechanism = "MEIC-CB05"
target_mechanism = "CB06"
start_date = "2018-12-01"
end_date = "2018-12-01"
cores = 4
/
&line
line_files = "motorway.shp", "primary.shp", "residential.shp", "secondary.shp"
line_factors = 0.435798, 0.326848, 0.081712, 0.155642,
/
&control
create_grid = 1,
grid_info = 1,
create_factor = 1,
coarse_emission = 1,
create_source = 1,
/
python .\coarse_emission_2_fine_emission.py
python .\Create-CMAQ-Emission-File.py
As of this step, there have been no errors reported. Then I also completed the data preparation for ICON, BCON, MCIP, and MASK
Finally, send an error message:
|> Check Emissions Mapping:
+============================
=============================================================================
|> SCALING EMISSIONS CONSISTENT WITH EMISSIONS CONTROL FILE SUPPLIED BY USER
=============================================================================
|> Regions Available for Scaling:
=================================
Number Region Label File Label Variable
------ ------------ ---------- --------
1 EVERYWHERE N/A N/A
|> Map Available Emissions Surrogates to Defaults:
==================================================|> Checking Emissions Surrogate Units: ====================================== *** ERROR ABORT in subroutine CHECK_EMIS_UNITS on PE 000 ERROR: Surrogate Species ALD2 on emission stream 1 has units MOLES/S\00\00\00\00\00\00\00\00\00 which are unkown to CMAQ. Please correct them to proceed.
PM3EXIT: date&time specified as 0
Date&time specified as 0
Attached are run_cctm.csh and CTM_LOG
run_cctm_meic_20220320.zip
检查一下你的排放文件中的 units 部分为什么会出现以下的乱码:
G/S\00\00\00\00\00\00\00\00\00\00\00\00\00
有可能是你在运行或者写入物种文件的过程中出现了中文或者其他特殊字符。