ofdm-processor: SyncOnPhase failed when initiating scan
Closed this issue · 1 comments
MichaelTrip commented
Hi,
I tried welle.io but i ran into a issue. When i tried to start a scan i get the following error messages:
2023-07-08T22:25:32.733 Debug: main: Set language "en_US"
2023-07-08T22:25:32.733 Debug: main: Error while loading language "en_US" use untranslated text (ie. English)
2023-07-08T22:25:33.350 Debug: Used input device: 0
2023-07-08T22:25:33.353 Debug: main: Set language "en_US"
2023-07-08T22:25:33.353 Debug: main: Error while loading language "en_US" use untranslated text (ie. English)
2023-07-08T22:25:33.359 Debug: Used input device: 2
2023-07-08T22:25:33.360 Debug: Apply settings initially
2023-07-08T22:25:33.360 Debug: RadioController: Close device
2023-07-08T22:25:33.362 Info: RTL_SDR: Open rtl-sdr
2023-07-08T22:25:33.368 Info: RTL_SDR: Found 1 devices. Uses the first working one
Found Rafael Micro R820T tuner
2023-07-08T22:25:33.764 Info: RTL_SDR: Opening rtl-sdr device0
[R82XX] PLL not locked!
2023-07-08T22:25:33.882 Info: RTL_SDR: Supported gain values29
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 49.6
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 48
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 44.5
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 43.9
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 43.4
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 42.1
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 40.2
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 38.6
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 37.2
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 36.4
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 33.8
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 32.8
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 29.7
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 28
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 25.4
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 22.9
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 20.7
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 19.7
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 16.6
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 15.7
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 14.4
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 12.5
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 8.7
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 7.7
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 3.7
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 2.7
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 1.4
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 0.9
2023-07-08T22:25:33.882 Info: RTL_SDR: gain 0
2023-07-08T22:25:33.908 Debug: RadioController: AGC on
2023-07-08T22:25:33.919 Info: RTL_SDR: Set bias tee to 1
2023-07-08T22:25:33.981 Debug: os: linux
2023-07-08T22:25:33.981 Debug: desktopAvailableWidth: 1920
2023-07-08T22:25:33.981 Debug: desktopAvailableHeight: 1048
2023-07-08T22:25:33.981 Debug: orientation: 2
2023-07-08T22:25:33.981 Debug: devicePixelRatio: 1
2023-07-08T22:25:33.981 Debug: pixelDensity: 6.803571428571429
2023-07-08T22:25:33.982 Debug: Creating component: qrc:/QML/RadioView.qml
2023-07-08T22:25:34.007 Debug: Creating component: qrc:/QML/MotView.qml
2023-07-08T22:25:34.029 Warning: QQmlComponent: Created graphical object was not placed in the graphics scene.
2023-07-08T22:25:34.030 Debug: Creating component: qrc:/QML/expertviews/ServiceDetails.qml
2023-07-08T22:25:34.882 Debug: Audio: Current sound output "Built-in Audio Analog Stereo"
2023-07-08T22:25:34.885 Debug: Audio: Volume 1
2023-07-08T22:25:41.234 Debug: RadioController: Start channel scan
2023-07-08T22:25:41.297 Debug: RadioController: Tune to channel "5A" -> 174.928 MHz
2023-07-08T22:25:41.297 Info: RTL_SDR: Start rtlsdr_read_async_wrapper() thread
2023-07-08T22:25:41.380 Info: RTL_SDR: End rtlsdr_read_async_wrapper() thread
2023-07-08T22:25:41.436 Info: RTL_SDR: Start rtlsdr_read_async_wrapper() thread
2023-07-08T22:25:41.514 Info: New Receiver Options: TII: 1 disable coarse corr: 0 freqsync: CorrelatePRS fft placement: EarliestPeakWithBinning
2023-07-08T22:25:41.515 Info: OFDM-processor:restart
2023-07-08T22:25:41.964 Info: OFDM-processor: closing down
2023-07-08T22:25:41.964 Debug: RadioController: Tune to channel "5B" -> 176.64 MHz
2023-07-08T22:25:42.042 Info: RTL_SDR: End rtlsdr_read_async_wrapper() thread
2023-07-08T22:25:42.102 Info: RTL_SDR: Start rtlsdr_read_async_wrapper() thread
2023-07-08T22:25:42.160 Info: OFDM-decoder:closing down now
2023-07-08T22:25:42.161 Info: New Receiver Options: TII: 1 disable coarse corr: 0 freqsync: CorrelatePRS fft placement: EarliestPeakWithBinning
2023-07-08T22:25:42.161 Info: OFDM-processor:restart
2023-07-08T22:25:42.222 Info: ofdm-processor: Lost coarse sync (coarseCorrector: 0; fineCorrector: 0)
2023-07-08T22:25:43.756 Info: ofdm-processor: SyncOnPhase failed
2023-07-08T22:25:43.958 Info: ofdm-processor: SyncOnPhase failed
2023-07-08T22:25:44.540 Info: ofdm-processor: SyncOnPhase failed
2023-07-08T22:25:44.786 Info: ofdm-processor: SyncOnPhase failed
2023-07-08T22:25:45.464 Info: ofdm-processor: SyncOnPhase failed
2023-07-08T22:25:45.474 Info: ofdm-processor: SyncOnPhase failed
It doesn't find any stations.
I am using ArchLinux with the rtl-sdr drivers. I tried both the Appimage (latest build) and from the AUR.
AlbrechtL commented
This usually happens when your reception is bad.