ISP Genexis Router has 4051 as VLAN but replacing it with V2802RH scan gives VLAN 1502
d5aqoep opened this issue · 5 comments
My ISP TataPlay Fiber has Alcatel OLT and gave me Genexis Router. In it's web GUI, I can see VLAN is 4051 for Internet and VLAN 4052 for voice. However, after cloning the GPON SN and PLOAM in Vsol V2802RH, the command omcicli mib get 84 gives VLAN as 1502 and internet works only if I put 1502 as VLAN in the Vsol. 4051 does not work in it.
Why are my VLANs changing if I use a 3rd party ONU? The thing is on VLAN 4051, IPv6 works correctly but on 1502, IPv6 has issues and does not assign non-temporary WAN IPv6.
Can anything be done to make VSOL V2802RH use the VLAN 4051 according to my IPS's Router?
@Anime4000
I haven't research on that VSOL, if interface is same like D-Link DPN-FX3060V
if ticking ✅ LAN 1 at WAN page
mean it will be untagged at LAN 1
D-Link DPN-FX3060V
Yes the interface is very similar just different color theme. But I didn't get what you are saying.
It has 2 LAN ports. 1st port is 1Gbe and 2nd port (blue color) is 2.5Gbe
indeed,
when you ✅ LAN X it mean VLAN will be untag, you need connect without any vlan
because VSOL has untag it
indeed,
when you ✅ LAN X it mean VLAN will be untag, you need connect without any vlan
because VSOL has untag it
I mean try same 2nd port with no VLAN ?
I mean try same 2nd port with no VLAN ?
Yes