Lite Radio 2 SE new cannot bind to Frsky D16
matejkarasek opened this issue · 11 comments
I have a Lite Radio 2 SE Frsky (with configurator support).
The configurator (1.1.1-RC1) works great, but even after flashing the latest radio firmware (2.0.1) I cannot bind to a Frsky D16 receiver (R-XSR).
Both FCC and EU-LBT are not working...
The same receiver binds fine with my Lite Radio 2 and also with an older Lite Radio 2 SE (no configurator support) after firmware update to this bin:
https://drive.google.com/file/d/1TnaKqx17QRmBzgt9kn9J_ZsabdmhN12O/view?usp=sharing
I hope this can be fixed soon, as the radio is not usable at this point!
EDIT:
In the receiver, I am using ACCST v1.x firmware (I have tried R-XSR_LBT_190311, RXSR_LBT_ACCST_191112). I am certain the receiver is not using ACCST v2.
The transmitter is set up to FrSky D16 LBT (ACCST 1.x) protocol (2 red flashes on startup).
In the transmitter (LiteRadio_2_SE_V2_CC2500), I have tried all the firmwares available in the BetaFPV Configurator (1.0.0, 1.0.1, 1.0.2, 2.0.0, 2.0.1), none of them bind.
I have also tried switching to FCC on both the transmitter and the receiver with no luck either.
This is reproducible on several Lite Radio 2 SE V2 units that I own.
I have the exact same problem. Did you find any solution?
No, not yet :(
@HWT662988 Would you know what could be the cause?
Any chance this issue will get any attention soon?
I get the same problem when binding to an FrSky XM+. Here, once in 5 attempts the binding succeeds, but takes much longer than with any other radio. All my OpenTX/EdgeTX transmitters bind immediately to both of these receivers...
There must be some firmware issue in the code responsible for binding...
Do you finded fix for this?
For xm+ the fix is flash on xm+ a firmware more old.
But for R-XSR i tried all firmwares without luck.(about 7-10 versions)
No, no fix...
Indeed the XM+ sometimes works, the R-XSR not...
Do you tried this????
I found it right now
https://support.betafpv.com/hc/en-us/articles/900005322963-How-to-Flash-Firmware-of-LiteRadio-2-SE
This is for an older version of the Lite Radio 2...
Hey there.
Having the exact same issue with a Literadio 2 SE (old version) and the R-XSR.
Radio binds fine to my very old XM+ but no luck on the R-XSR with both available firmwares (1903 and 1911).
I've seen an even older version of the firmware for the receiver (like 18xxxx) but can't find it anywhere.
Somebody maybe have a link?
https://youtu.be/5fa6TkXN0IM this is for elrs, but the idea is the same. It will allow you to change firmwares. Still haven't gotten it to bind though.
If I go to BF 4.2.11 I can bind but I loose the gyro. If I go to BF 4.3 I can't bind, but I have the gyro. Can I copy and paste some config stuff?