BerkeleyLab/Marble

Issues

• Marble v1.4

  #50 opened a year ago by michalgaska
  3

• Add heatsinks for FPGA and clock mux to schematic and BOM

  #30 opened a year ago by csp
  1

• Marble - work status

  #20 opened a year ago by michalgaska
  1

• Marble v1.4 - wrong PN for J9

  #48 opened a year ago by michalgaska
  0

• pull-up resistors behind the I2C mux are too weak

  #40 opened a year ago by michalgaska
  2

• Marble v1.4 Wishlist

  #46 opened a year ago by michalgaska
  1

• Which Kicad version to use to open the layout

  #47 opened 2 years ago by buenoshun
  1

• I2C bus repeaters latch-up

  #32 opened 2 years ago by michalgaska
  2

• Missing latest schematic PDF from repository and releases

  #45 opened 2 years ago by lerwys
  2

• Add serial number information on silnkscreen

  #44 opened 2 years ago by csp
  0

• Add FPGA and crosspoint switch heatsinks to BOM

  #43 opened 2 years ago by csp
  0

• Remove generated pdf files from repository

  #37 opened 3 years ago by lerwys
  0

• FMC naming convention

  #35 opened 3 years ago by jersey99
  0

• Rework: Compensate for lack of U47.

  #33 opened 3 years ago by sdmurthy
  0

• Update SO-DIMM module part # (current part listed as obsolete)

  #31 opened 3 years ago by csp
  1

• ideal diode improvements

  #22 opened 4 years ago by michael-betz
  3

• Marble bring up current status

  #11 opened 3 years ago by michalgaska
  1

• CLK20_VCXO_T line doesn’t drive a clock-capable pin.

  #4 opened 3 years ago by norumwe12
  8

• List of changes

  #19 opened 3 years ago by michalgaska
  0

• Marble thermal image

  #24 opened 4 years ago by michalgaska
  1

• QSFP1 lanes are swapped in two places

  #23 opened 3 years ago by marmeladapk
  3

• PoE bridges issue

  #18 opened 3 years ago by michalgaska
  1

• Too high voltage (1V73) on 1V5

  #17 opened 3 years ago by michalgaska
  1

• I2C_App level translator

  #15 opened 3 years ago by michalgaska
  1

• FMC2 LED should be rotated

  #14 opened 3 years ago by michalgaska
  1

• Connect SO-DIMM I2C to the MUX

  #13 opened 3 years ago by michalgaska
  1

• LDO gets hot

  #12 opened 3 years ago by michalgaska
  0

• SWD connected to wrong microcontroller's pins

  #10 opened 3 years ago by michalgaska
  2

• No capacitors around the ADN4600

  #9 opened 3 years ago by michalgaska
  2

• FPGA JTAG connector - no Vref

  #8 opened 3 years ago by michalgaska
  2

• Replace all BSS139 -> BSS138

  #7 opened 3 years ago by michalgaska
  1

• Remove R142 and R138

  #6 opened 3 years ago by michalgaska
  1

• U35 - XRP7724 and U23 - FT4232H-56Q are rotated

  #5 opened 3 years ago by michalgaska
  0

• Segger connector orientation indicator on silkscreen or mating connector

  #3 opened 4 years ago by jersey99
  1

• VDDO_SEL

  #2 opened 4 years ago by gkasprow
  1

• Bank voltages incompatible with Kintex

  #1 opened 4 years ago by ldoolitt
  8