`Bug` Bleuprint onknow with dev version
Closed this issue · 4 comments
TFT Version
4.4.0.dev1
Firmware Version
4.4.0.dev1
Blueprint Version
4.4.0.dev1
Panel Model
EU
What is the bug?
Tried everything but bleuprint says unknown.
If i try the bleuprint from main it will load.
just selected the bare minimun in the bleuprint.
Also when use the main branch with bleuprint 4.4.0.dev1 it says unknown.
happens with esphome main , beta and dev.
Steps to Reproduce
No response
Your Panel's YAML
No response
ESPHome Logs
INFO ESPHome 2024.10.0-dev
INFO Reading configuration /config/esphome/zolder.yaml...
INFO Updating https://github.com/Blackymas/NSPanel_HA_Blueprint@dev
INFO Updating https://github.com/Blackymas/NSPanel_HA_Blueprint@v4.4.0.dev1
INFO Detected timezone 'Europe/Amsterdam'
INFO Starting log output from 192.168.2.19 using esphome API
INFO Successfully connected to zolder @ 192.168.2.19 in 0.083s
INFO Successful handshake with zolder @ 192.168.2.19 in 0.019s
[09:01:00][I][app:100]: ESPHome version 2024.10.0-dev compiled on Sep 22 2024, 08:37:28
[09:01:00][I][app:102]: Project esphome.NSPanel_HA_Blueprint version 4.4.0.dev1
[09:01:00][C][wifi:600]: WiFi:
[09:01:00][C][wifi:428]: Local MAC: E4:65:B8:1C:11:74
[09:01:00][C][wifi:433]: SSID: [redacted]
[09:01:00][C][wifi:436]: IP Address: 192.168.2.19
[09:01:00][C][wifi:440]: BSSID: [redacted]
[09:01:00][C][wifi:441]: Hostname: 'zolder'
[09:01:00][C][wifi:443]: Signal strength: -49 dB ▂▄▆█
[09:01:00][C][wifi:447]: Channel: 4
[09:01:00][C][wifi:448]: Subnet: 255.255.255.0
[09:01:00][C][wifi:449]: Gateway: 192.168.2.254
[09:01:00][C][wifi:450]: DNS1: 192.168.2.254
[09:01:00][C][wifi:451]: DNS2: 0.0.0.0
[09:01:00][C][logger:185]: Logger:
[09:01:00][C][logger:186]: Level: DEBUG
[09:01:00][C][uart.idf:159]: UART Bus 0:
[09:01:00][C][uart.idf:160]: TX Pin: GPIO16
[09:01:00][C][uart.idf:161]: RX Pin: GPIO17
[09:01:00][C][uart.idf:163]: RX Buffer Size: 256
[09:01:00][C][uart.idf:165]: Baud Rate: 115200 baud
[09:01:00][C][uart.idf:166]: Data Bits: 8
[09:01:00][C][uart.idf:167]: Parity: NONE
[09:01:00][C][uart.idf:168]: Stop bits: 1
[09:01:00][C][template.sensor:022]: Template Sensor 'Blueprint'
[09:01:00][C][template.sensor:022]: State Class: ''
[09:01:00][C][template.sensor:022]: Unit of Measurement: '%'
[09:01:00][C][template.sensor:022]: Accuracy Decimals: 1
[09:01:00][C][template.sensor:022]: Icon: 'mdi:link-variant'
[09:01:00][C][template.sensor:023]: Update Interval: 60.0s
[09:01:00][C][uptime.sensor:033]: Uptime Sensor 'Uptime seconds'
[09:01:00][C][uptime.sensor:033]: Device Class: 'duration'
[09:01:00][C][uptime.sensor:033]: State Class: 'total_increasing'
[09:01:00][C][uptime.sensor:033]: Unit of Measurement: 's'
[09:01:00][C][uptime.sensor:033]: Accuracy Decimals: 0
[09:01:00][C][uptime.sensor:033]: Icon: 'mdi:timer-outline'
[09:01:00][C][uptime.sensor:034]: Type: Seconds
[09:01:00][C][template.sensor:022]: Template Sensor 'API uptime'
[09:01:00][C][template.sensor:022]: Device Class: 'timestamp'
[09:01:00][C][template.sensor:022]: State Class: ''
[09:01:00][C][template.sensor:022]: Unit of Measurement: ''
[09:01:00][C][template.sensor:022]: Accuracy Decimals: 0
[09:01:00][C][template.sensor:023]: Update Interval: never
[09:01:00][C][template.sensor:022]: Template Sensor 'Device uptime'
[09:01:00][C][template.sensor:022]: Device Class: 'timestamp'
[09:01:00][C][template.sensor:022]: State Class: ''
[09:01:00][C][template.sensor:022]: Unit of Measurement: ''
[09:01:00][C][template.sensor:022]: Accuracy Decimals: 0
[09:01:00][C][template.sensor:023]: Update Interval: never
[09:01:00][W][nextion:431]: Nextion reported variable name invalid!
[09:01:00][I][script.boot_log:356]: init_page_home
[09:01:00][C][template.binary_sensor:028]: Template Binary Sensor 'Nextion display'
[09:01:00][C][template.binary_sensor:028]: Device Class: 'connectivity'
[09:01:00][C][ledc.output:180]: LEDC Output:
[09:01:00][C][ledc.output:181]: Pin GPIO21
[09:01:00][C][ledc.output:182]: LEDC Channel: 0
[09:01:00][C][ledc.output:183]: PWM Frequency: 1319.0 Hz
[09:01:00][C][ledc.output:184]: Phase angle: 0.0°
[09:01:00][C][ledc.output:185]: Bit depth: 15
[09:01:00][C][switch.gpio:068]: GPIO Switch 'Nextion display - Power'
[09:01:00][C][switch.gpio:091]: Restore Mode: always ON
[09:01:00][C][switch.gpio:031]: Pin: GPIO4
[09:01:00][C][template.text_sensor:020]: Template Sensor 'Notification Label'
[09:01:00][C][template.text_sensor:020]: Template Sensor 'Notification Text'
[09:01:00][C][template.text_sensor:020]: Template Sensor 'Version Blueprint'
[09:01:00][C][template.text_sensor:020]: Icon: 'mdi:tag-text-outline'
[09:01:00][C][template.text_sensor:020]: Template Sensor 'Version ESPHome'
[09:01:00][C][template.text_sensor:020]: Icon: 'mdi:tag-text-outline'
[09:01:00][C][template.text_sensor:020]: Template Sensor 'Device Name'
[09:01:00][C][template.text_sensor:020]: Icon: 'mdi:identifier'
[09:01:00][C][template.text_sensor:020]: Template Sensor 'Detailed Entity'
[09:01:00][C][template.text_sensor:020]: Icon: 'mdi:tablet-dashboard'
[09:01:00][C][template.number:050]: Template Number 'Display Brightness'
[09:01:00][C][template.number:050]: Unit of Measurement: '%'
[09:01:00][C][template.number:051]: Optimistic: YES
[09:01:00][C][template.number:052]: Update Interval: 60.0s
[09:01:00][C][template.number:050]: Template Number 'Display Brightness Dimdown'
[09:01:00][C][template.number:050]: Unit of Measurement: '%'
[09:01:00][C][template.number:051]: Optimistic: YES
[09:01:00][C][template.number:052]: Update Interval: 60.0s
[09:01:00][C][template.number:050]: Template Number 'Display Brightness Sleep'
[09:01:00][C][template.number:050]: Unit of Measurement: '%'
[09:01:00][C][template.number:051]: Optimistic: YES
[09:01:00][C][template.number:052]: Update Interval: 60.0s
[09:01:00][C][template.number:050]: Template Number 'Temperature Correction'
[09:01:00][C][template.number:050]: Unit of Measurement: '°C'
[09:01:00][C][template.number:051]: Optimistic: YES
[09:01:00][C][template.number:052]: Update Interval: 60.0s
[09:01:00][D][script.set_component_visibility:2050]: vis bt_qrcode,0
[09:01:00][C][template.number:050]: Template Number 'Timeout Page'
[09:01:00][C][template.number:050]: Icon: 'mdi:timer'
[09:01:00][C][template.number:050]: Unit of Measurement: 's'
[09:01:00][C][template.number:051]: Optimistic: YES
[09:01:00][C][template.number:052]: Update Interval: 60.0s
[09:01:00][C][template.number:050]: Template Number 'Timeout Dimming'
[09:01:00][C][template.number:050]: Icon: 'mdi:timer'
[09:01:00][C][template.number:050]: Unit of Measurement: 's'
[09:01:00][C][template.number:051]: Optimistic: YES
[09:01:00][C][template.number:052]: Update Interval: 60.0s
[09:01:00][C][template.number:050]: Template Number 'Timeout Sleep'
[09:01:00][C][template.number:050]: Icon: 'mdi:timer'
[09:01:00][C][template.number:050]: Unit of Measurement: 's'
[09:01:00][C][template.number:051]: Optimistic: YES
[09:01:00][C][template.number:052]: Update Interval: 60.0s
[09:01:00][C][template.select:065]: Template Select 'Baud rate'
[09:01:00][C][template.select:065]: Icon: 'mdi:swap-horizontal'
[09:01:00][C][template.select:066]: Update Interval: 60.0s
[09:01:00][C][template.select:069]: Optimistic: YES
[09:01:00][C][template.select:070]: Initial Option: 115200
[09:01:00][C][template.select:071]: Restore Value: YES
[09:01:00][C][template.select:065]: Template Select 'Wake-up page'
[09:01:00][C][template.select:065]: Icon: 'mdi:page-next-outline'
[09:01:00][C][template.select:066]: Update Interval: 60.0s
[09:01:00][C][template.select:069]: Optimistic: YES
[09:01:00][C][template.select:070]: Initial Option: home
[09:01:00][C][template.select:071]: Restore Value: YES
[09:01:00][C][template.select:065]: Template Select 'Update TFT display - Model'
[09:01:00][C][template.select:065]: Icon: 'mdi:file-sync'
[09:01:00][C][template.select:066]: Update Interval: 60.0s
[09:01:00][C][template.select:069]: Optimistic: YES
[09:01:00][C][template.select:070]: Initial Option: NSPanel EU
[09:01:00][C][template.select:071]: Restore Value: YES
[09:01:00][C][template.select:065]: Template Select 'Update TFT display - Baud rate'
[09:01:00][C][template.select:065]: Icon: 'mdi:swap-horizontal'
[09:01:00][C][template.select:066]: Update Interval: 60.0s
[09:01:00][C][template.select:069]: Optimistic: YES
[09:01:00][C][template.select:070]: Initial Option: 921600
[09:01:00][C][template.select:071]: Restore Value: YES
[09:01:01][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Left Button'
[09:01:01][C][gpio.binary_sensor:016]: Pin: GPIO14
[09:01:01][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Right Button'
[09:01:01][C][gpio.binary_sensor:016]: Pin: GPIO27
[09:01:01][C][switch.gpio:068]: GPIO Switch 'Relay 1'
[09:01:01][C][switch.gpio:091]: Restore Mode: restore defaults to OFF
[09:01:01][C][switch.gpio:031]: Pin: GPIO22
[09:01:01][C][switch.gpio:068]: GPIO Switch 'Relay 2'
[09:01:01][C][switch.gpio:091]: Restore Mode: restore defaults to OFF
[09:01:01][C][switch.gpio:031]: Pin: GPIO19
[09:01:01][C][template.switch:068]: Template Switch 'Notification unread'
[09:01:01][C][template.switch:091]: Restore Mode: always OFF
[09:01:01][C][template.switch:057]: Optimistic: YES
[09:01:01][C][template.switch:068]: Template Switch 'Notification sound'
[09:01:01][C][template.switch:091]: Restore Mode: restore defaults to OFF
[09:01:01][C][template.switch:057]: Optimistic: YES
[09:01:01][C][template.switch:068]: Template Switch 'Wake-up with hardware buttons'
[09:01:01][C][template.switch:091]: Restore Mode: restore defaults to OFF
[09:01:01][C][template.switch:057]: Optimistic: YES
[09:01:01][C][template.switch:068]: Template Switch 'Update TFT automatically'
[09:01:01][C][template.switch:070]: Icon: 'mdi:file-sync'
[09:01:01][C][template.switch:091]: Restore Mode: restore defaults to OFF
[09:01:01][C][template.switch:057]: Optimistic: YES
[09:01:01][C][adc:097]: ADC Sensor 'ntc_source'
[09:01:01][C][adc:097]: Device Class: 'voltage'
[09:01:01][C][adc:097]: State Class: 'measurement'
[09:01:01][C][adc:097]: Unit of Measurement: 'V'
[09:01:01][C][adc:097]: Accuracy Decimals: 2
[09:01:01][C][adc:107]: Pin: GPIO38
[09:01:01][C][adc:122]: Attenuation: 12db
[09:01:01][C][adc:141]: Samples: 4
[09:01:01][C][adc:142]: Update Interval: 10.0s
[09:01:01][C][homeassistant.time:010]: Home Assistant Time:
[09:01:01][C][homeassistant.time:011]: Timezone: 'CET-1CEST,M3.5.0,M10.5.0/3'
[09:01:01][C][rtttl:029]: Rtttl
[09:01:01][C][version.text_sensor:021]: Version Text Sensor 'ESPhome Compiler'
[09:01:01][C][version.text_sensor:021]: Icon: 'mdi:tag-text-outline'
[09:01:01][C][psram:020]: PSRAM:
[09:01:01][C][psram:021]: Available: YES
[09:01:01][C][psram:024]: Size: 2036 KB
[09:01:01][C][factory_reset.button:011]: Factory Reset Button 'Factory reset'
[09:01:01][C][factory_reset.button:011]: Icon: 'mdi:restart-alert'
[09:01:01][C][restart.button:017]: Restart Button 'Restart'
[09:01:01][C][restart.button:017]: Icon: 'mdi:restart'
[09:01:01][C][nextion:138]: Nextion:
[09:01:01][C][nextion:142]: Device Model: NX4832F035_011C
[09:01:01][C][nextion:143]: Firmware Version: 110
[09:01:01][C][nextion:144]: Serial Number: CCB33401746EE755
[09:01:01][C][nextion:145]: Flash Size: 16777216
[09:01:01][C][nextion:147]: Wake On Touch: YES
[09:01:01][C][nextion:148]: Exit reparse: YES
[09:01:02][C][captive_portal:089]: Captive Portal:
[09:01:02][C][web_server:145]: Web Server:
[09:01:02][C][web_server:146]: Address: zolder.local:80
[09:01:02][C][mdns:116]: mDNS:
[09:01:02][C][mdns:117]: Hostname: zolder
[09:01:02][C][esphome.ota:073]: Over-The-Air updates:
[09:01:02][C][esphome.ota:074]: Address: zolder.local:3232
[09:01:02][C][esphome.ota:075]: Version: 2
[09:01:02][C][esphome.ota:078]: Password configured
[09:01:02][C][safe_mode:018]: Safe Mode:
[09:01:02][C][safe_mode:020]: Boot considered successful after 60 seconds
[09:01:02][C][safe_mode:021]: Invoke after 3 boot attempts
[09:01:02][C][safe_mode:023]: Remain in safe mode for 180 seconds
[09:01:02][C][api:139]: API Server:
[09:01:02][C][api:140]: Address: zolder.local:6053
[09:01:02][C][api:144]: Using noise encryption: NO
[09:01:02][C][wifi_signal.sensor:010]: WiFi Signal 'RSSI'
[09:01:02][C][wifi_signal.sensor:010]: Device Class: 'signal_strength'
[09:01:02][C][wifi_signal.sensor:010]: State Class: 'measurement'
[09:01:02][C][wifi_signal.sensor:010]: Unit of Measurement: 'dBm'
[09:01:02][C][wifi_signal.sensor:010]: Accuracy Decimals: 0
[09:01:02][C][wifi_signal.sensor:010]: Icon: 'mdi:wifi'
[09:01:02][C][wifi_info:012]: WifiInfo SSID 'SSID'
[09:01:02][C][wifi_info:013]: WifiInfo BSSID 'BSSID'
[09:01:02][C][wifi_info:010]: WifiInfo IPAddress 'IP'
[09:01:10][C][nspanel_ha_blueprint:1381]: Wi-Fi: Excellent (-47 dBm)
[09:01:10][C][nspanel_ha_blueprint:1392]: API: Connected
[09:01:10][C][nspanel_ha_blueprint:1400]: Blueprint:
[09:01:10][W][nspanel_ha_blueprint:1405]: Init steps: 2 (3.2%)
[09:01:10][W][nspanel_ha_blueprint:1406]: State: Pending
[09:01:10][C][nspanel_ha_blueprint:1407]: Requesting blueprint settings
[09:01:10][C][nspanel_ha_blueprint:1412]: ESPHome:
[09:01:10][C][nspanel_ha_blueprint:1413]: Version: 4.4.0.dev1
[09:01:10][C][nspanel_ha_blueprint:1414]: Compiler: 2024.10.0-dev
[09:01:10][C][nspanel_ha_blueprint:1419]: Framework: ESP-IDF
[09:01:10][C][nspanel_ha_blueprint:1424]: Free heap:
[09:01:10][C][nspanel_ha_blueprint:1428]: Internal: 177080 bytes (50.5%)
[09:01:10][C][nspanel_ha_blueprint:1438]: PSRAM: 2011423 bytes (96.5%)
[09:01:10][C][nspanel_ha_blueprint:1445]: UART:
[09:01:10][C][nspanel_ha_blueprint:1446]: Baud rate: 115200 bps
[09:01:10][C][nspanel_ha_blueprint:1447]: Queue size: 0
[09:01:10][C][nspanel_ha_blueprint:1451]: Nextion:
[09:01:10][C][nspanel_ha_blueprint:1452]: Queue size: 0
[09:01:10][C][nspanel_ha_blueprint:1454]: Is setup: True
[09:01:10][C][nspanel_ha_blueprint:1461]: Init: True
[09:01:10][C][nspanel_ha_blueprint:1467]: TFT: 4.4.0.dev1
[09:01:10][C][nspanel_ha_blueprint:1468]: Packages:
[09:01:10][C][nspanel_ha_blueprint:1470]: - Core
[09:01:10][C][nspanel_ha_blueprint:1473]: - Advanced
[09:01:10][C][nspanel_ha_blueprint:1479]: - Upload TFT
[09:01:10][C][nspanel_ha_blueprint:1500]: Components:
[09:01:10][C][nspanel_ha_blueprint:1511]: - Captive portal
[09:01:10][C][nspanel_ha_blueprint:1517]: - Web server
[09:01:10][C][nspanel_ha_blueprint:097]: Add-on Upload TFT:
[09:01:10][C][nspanel_ha_blueprint:098]: File model: NSPanel EU
[09:01:10][C][nspanel_ha_blueprint:099]: Valid TFT: YES
[09:01:10][W][component:237]: Component script took a long time for an operation (58 ms).
[09:01:10][W][component:238]: Components should block for at most 30 ms.
[09:01:10][W][nextion:431]: Nextion reported variable name invalid!
[09:01:10][I][script.boot_log:356]: init_page_home
[09:01:10][D][script.set_component_visibility:2050]: vis bt_qrcode,0
[09:01:20][I][script.boot_log:356]: init_page_home
[09:01:20][W][nextion:431]: Nextion reported variable name invalid!
[09:01:20][D][script.set_component_visibility:2050]: vis bt_qrcode,0
[09:01:35][I][script.boot_log:356]: init_page_home
[09:01:35][W][nextion:431]: Nextion reported variable name invalid!
[09:01:35][D][script.set_component_visibility:2050]: vis bt_qrcode,0
[09:01:45][I][script.boot_log:356]: init_page_home
[09:01:45][W][nextion:431]: Nextion reported variable name invalid!
[09:01:45][D][script.set_component_visibility:2050]: vis bt_qrcode,0
[09:01:55][I][script.boot_log:356]: init_page_home
[09:01:55][W][nextion:431]: Nextion reported variable name invalid!
[09:01:55][D][script.set_component_visibility:2050]: vis bt_qrcode,0
[09:02:05][I][script.boot_log:356]: init_page_home
[09:02:05][W][nextion:431]: Nextion reported variable name invalid!
[09:02:05][D][script.set_component_visibility:2050]: vis bt_qrcode,0
[09:02:15][I][script.boot_log:356]: init_page_home
[09:02:15][W][nextion:431]: Nextion reported variable name invalid!
[09:02:15][D][script.set_component_visibility:2050]: vis bt_qrcode,0
[09:02:25][I][script.boot_log:356]: init_page_home
[09:02:25][W][nextion:431]: Nextion reported variable name invalid!
[09:02:25][D][script.set_component_visibility:2050]: vis bt_qrcode,0
[09:02:35][W][nextion:431]: Nextion reported variable name invalid!
[09:02:35][I][script.boot_log:356]: init_page_home
[09:02:35][D][script.set_component_visibility:2050]: vis bt_qrcode,0
[09:02:45][I][script.boot_log:356]: init_page_home
[09:02:45][W][nextion:431]: Nextion reported variable name invalid!
[09:02:45][D][script.set_component_visibility:2050]: vis bt_qrcode,0
[09:02:55][I][script.boot_log:356]: init_page_home
[09:02:55][W][nextion:431]: Nextion reported variable name invalid!
[09:02:55][D][script.set_component_visibility:2050]: vis bt_qrcode,0
Home Assistant Logs
No response
Do you have any error log related to the Blueprint from Home Assistant side (under Settings > System > Logs)?
I'm not at home today, but will try to loot at this as soon I get home.
home-assistant_2024-09-22T14-40-25.642Z.log
Here is the logfile
Dont know what you did change, but its working perfect again.
Thx a lot and keep up the great work on this project !