Problem collect2.exe: error: ld returned 1 exit status

[Adri-Dax]

Goodnight. I am trying to compile the software for the botox bms. I always get this error even if I don't modify any data and I try to get this error. Because it can be? Thanks a lothttps://gyazo.com/b96deac829e8d47a71749b10672722d6
Compiling .pio\build\sp15s001\FrameworkArduino\wiring_analog.c.o
Compiling .pio\build\sp15s001\FrameworkArduino\wiring_digital.c.o
Compiling .pio\build\sp15s001\FrameworkArduino\wiring_pulse.S.o
Compiling .pio\build\sp15s001\FrameworkArduino\wiring_pulse.c.o
Compiling .pio\build\sp15s001\FrameworkArduino\wiring_shift.c.o
Archiving .pio\build\sp15s001\libFrameworkArduino.a
Linking .pio\build\sp15s001\firmware.elf
C:\Users\Adri\AppData\Local\Temp\ccviLg1E.ltrans0.ltrans.o: In function _Li2c_read_bit': <artificial>:(.text+0xe6c): relocation truncated to fit: R_AVR_13_PCREL against no symbol'
:(.text+0xe70): relocation truncated to fit: R_AVR_13_PCREL against no symbol' <artificial>:(.text+0xe7c): relocation truncated to fit: R_AVR_13_PCREL against no symbol'
C:\Users\Adri\AppData\Local\Temp\ccviLg1E.ltrans0.ltrans.o: In function _Li2c_put_ack_high': <artificial>:(.text+0xe9c): relocation truncated to fit: R_AVR_13_PCREL against no symbol'
:(.text+0xea8): relocation truncated to fit: R_AVR_13_PCREL against no symbol' <artificial>:(.text+0xeaa): relocation truncated to fit: R_AVR_13_PCREL against no symbol'
C:\Users\Adri\AppData\Local\Temp\ccviLg1E.ltrans0.ltrans.o: In function _Li2c_write_high': <artificial>:(.text+0xeda): relocation truncated to fit: R_AVR_13_PCREL against no symbol'
:(.text+0xee8): relocation truncated to fit: R_AVR_13_PCREL against no symbol' C:\Users\Adri\AppData\Local\Temp\ccviLg1E.ltrans0.ltrans.o: In function _Ldelay_scl_high':
:(.text+0xef0): relocation truncated to fit: R_AVR_13_PCREL against no symbol' C:\Users\Adri\AppData\Local\Temp\ccviLg1E.ltrans0.ltrans.o: In function _Li2c_get_ack':
:(.text+0xefc): relocation truncated to fit: R_AVR_13_PCREL against no symbol' C:\Users\Adri\AppData\Local\Temp\ccviLg1E.ltrans0.ltrans.o: In function _Li2c_ack_wait':
:(.text+0xf0a): additional relocation overflows omitted from the output
collect2.exe: error: ld returned 1 exit status
*** [.pio\build\sp15s001\firmware.elf] Error 1
========================== [FAILED] Took 4.11 seconds ==========================

[mottscanley]

add some older versions of framework-arduino-avr and toolchain-atmelavr to platform_packages in .ini file
seems something in code is deprecated or not working properly with newer tools

[BotoX]

Seems to be an issue with https://github.com/felias-fogg/SoftI2CMaster and Atmel AVR 3.3 (worked on 2.2)
I've found some forum post where they've replaced all rjmp with jmp and rcall with call in SoftI2CMaster.h
Done that and it compiles for me now.
See: felias-fogg/SoftI2CMaster#50

I've pushed a commit which should fix that for you.