failing to connect

[ThatOneOcto]

when I use nxbt test it was able to connect but any other mode like nxbt demo or nxbt tui just hang and never end up connecting, also yes I am running them with sudo

[ThatOneOcto]

it says Paired on the switch in top left but the tui never picks it up and keeps saying connecting to any switch and it

[Dummydud3]

what device are you testing this on?

[ThatOneOcto]

rpi4

[Dummydud3]

could you tell us what kind of Bluetooth dongle you are using? What OS are you running? And (if able, not required) what version of Python are you running?

[ThatOneOcto]

I am using the one that comes with my rpi4 and I'm using raspbian

[Dummydud3]

Some devices take longer than others, so you should wait a few minutes. I assume you are running the newest version of SwitchOS? Make sure you're up to date on that. I would also recommend that you use Ubuntu-based systems if possible, but it should work anyway. Could you tell us what brand of Bluetooth Dongle you are using? Kind of hard to diagnose from here

[0x00xx]

Same issue here, test works, but demo does not.

$ uname -a
Linux raspberrypi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr  3 17:24:16 BST 2023 aarch64 GNU/Linux

Also on raspberry pi 4 b with latest Switch OS

[0x00xx]

Okay short update. Demo does not seem to work and test only randomly..
But I did the following to fix the webapp (which seems to work consistently)

git clone https://github.com/Brikwerk/nxbt.git
nano setup.py

Then change the install_requirements to the following:

install_requires=[
        "dbus-python==1.2.16",
        "Flask==2.3.2",
        "Flask-SocketIO==5.3.4",
        "eventlet==0.33.3",
        "blessed==1.17.10",
        "pynput==1.7.1",
        "psutil==5.6.6",
        "cryptography==39.0.1",
        "jinja2==3.1.2",
        "itsdangerous==2.1.2",
        "Werkzeug==2.3.3",
    ],

Save the file then run:

sudo pip3 install .

Afterwards webapp should work