Zibo 737: Stuck stab trim switch
Closed this issue · 1 comments
Clamb94 commented
When using StableApproach with the Zibo 737 there seems to be a bug causing the stab trim switches to get stuck in some cases,
which causes a stab trim runaway.
This only happens when using the dual trim switch commands, not the normal (single) trim command.
If you have those commands assigned, the problem might occur:
Pitch trim A up Pitch trim B up Pitch trim A down Pitch trim A down
As a workaround for now, you need to use the single trim commands:
Pitch trim up Pitch trim down
To be honest, I have no idea what causes this strange behavior. So it might take some time to get it fixed.
Clamb94 commented
Should be fixed with 1.0.0-RC