readings became unavailable
FuL75 opened this issue · 1 comments
FuL75 commented
Correctly connected to the slave device. Tried to read registers and everything was ok. Then I selected "write single register" without pressing "Apply" and from that moment I'm no more able to read anything more...not even in Home Assistant, all sensors are now unavailable!!!
Please help me to solve this issue
FuL75 commented
I've figured out to re-establish the communication with HA. I see that pressing the write button on the tool I've set all the values to 0 and watching the device manual I see that it corresponds to a baudrate of 1200. But now I cannot access to the module with the tool because is not possible to change the baudrate in TCP mode.
