ClemensElflein/OpenMower

Issues

• To be able to adjust LIFT_EMERGENCY_MILLIS

  #87 opened a month ago by sraillard
  0

• Voltage drop during charging and charger improvements

  #86 opened a month ago by sraillard
  0

• Improving the ADC

  #85 opened a month ago by sraillard
  0

• Work with bad WiFi coverage ?

  #73 opened 9 months ago by JBaptisme33
  1

• WORX Landroid M WR140

  #5 opened 2 years ago by TonyBrobston
  14

• US/North American source for compatible base hardware?

  #8 opened 2 years ago by aderusha
  5

• Option to mow in a randomized pattern?

  #3 opened 2 years ago by jh83
  7

• Change the blade motor rotation direction

  #15 opened 10 months ago by bdevijve
  1

• Add issues for development

  #9 opened 10 months ago by conradkirschner
  3

• Enable Low Level Emergency Deactivation (Button)

  #16 opened 10 months ago by endoskop27
  1

• Is there a way to adjust blade height?

  #33 opened 10 months ago by vipasane
  1

• Update IMU docs for new LSM6DSOTR

  #53 opened 10 months ago by rfvermut
  0

• How to start to build the mower?

  #4 opened 10 months ago by chicco83
  23

• Gardena Mower Compatibility

  #39 opened 10 months ago by JasperMC
  4

• Question about porting it to Rust?

  #55 opened 10 months ago by xyang2013
  0

• Lidl releasing 2x Mowers

  #66 opened 10 months ago by bdevijve
  0

• Build availability?

  #68 opened 10 months ago by WYNNGATE
  1

• Discord link expired

  #67 opened 10 months ago by westcode
  1

• Sharing of this project

  #70 opened 10 months ago by aeonSolutions
  0

• LowLevel - `init_imu` shall test that imu is accessible

  #43 opened a year ago by rfvermut
  0

• rain sensor always powered

  #57 opened a year ago by rfvermut
  0

• Deprecate speaker in favor of buzzer

  #52 opened a year ago by rfvermut
  2

• Add dfplayer silkscreen hints

  #51 opened a year ago by rfvermut
  1

• 3D gps holders holes are smaller than provided nuts

  #41 opened a year ago by rfvermut
  3

• Charger PCB - add missing parts to the kit, rethink the assembly process

  #42 opened a year ago by rfvermut
  1

• [0.10.x] PRi socket needs to be taller

  #38 opened a year ago by rfvermut
  1

• [0.10.x] WT901 pad is too narrow for manual soldering

  #37 opened a year ago by rfvermut
  0

• [0.10.x] Add "Boot RPi" button

  #40 opened a year ago by rfvermut
  0

• [0.10.x] put back RPI-DEV silkscreen

  #44 opened a year ago by rfvermut
  0

• WT901 overflow issue

  #31 opened a year ago by ClemensElflein
  2

• Website SSL Error

  #2 opened 2 years ago by admbradford
  4

• Avoid filesystem corruption

  #10 opened 2 years ago by vguttmann
  17

• Versioning / Branches / Releases

  #20 opened 2 years ago by ClemensElflein
  7

• small typo catkin_make

  #18 opened 2 years ago by alexngi66
  1

• Cutting grass in different pathways

  #13 opened 2 years ago by Frosty21
  1

• Perimeters

  #7 opened 2 years ago by nyxtom
  1

• Hardware availability

  #11 opened 2 years ago by midasf
  0

• Alternative to custom PCB

  #6 opened 2 years ago by conradkirschner
  4

• OpenMower is not Open Source

  #1 opened 2 years ago by abetusk
  12