Coopydood/ultimate-macOS-KVM

[ULTMOS] Qemu: qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]

aShabat opened this issue · 8 comments

aShabat commented

Describe the Issue

When trying to run boot.sh I get this error 4 times. Was able to run installation, but the system itself doesn't boot.

Reproduce the Issue

Choose all default options in Autopilot, disk type SSD.

Expectation

No response

Screenshots

Screenshot_20240624_212956
image

Operating System

Arch

Kernel

stable linux

Processor

AMD Ryzen 5 5600X

RAM (in GB)

16

GPU(s)

AMD Radeon RX 6600

Version

0.12.1

Branch

main

Additional Information

No response

Coopydood commented

Hi,

without seeing your boot script I’m going to have to guess:

  • Are you using an odd number of CPU cores? If so, make sure they are even.
  • Are you using an odd number of threads? Again, make sure they’re even. However, you should also try setting this to just 1 thread.
aShabat commented

Yes, they both are even. When I change number of threads script returns
Invalid CPU topology: product of the hierarchy must match maxcpus: sockets (1) * dies (1) * cores (2) * threads (0) != maxcpus (1)
Should I rerun Autopilot?

aShabat commented

My script:

NAME="macOS 12"
FILE="boot.sh"

ULTMOS=0.12.1
IGNORE_FILE=0
REQUIRES_SUDO=0
VFIO_PTA=0
VFIO_DEVICES=0
GEN_EPOCH=1719134653
FEATURE_LEVEL=7
VERBOSE=1
DISCORD_RPC=1
DISCORD_RPC_IMG="default"

SCREEN_RES="1280x720"

ALLOCATED_RAM="4G"
CPU_SOCKETS="1"
CPU_CORES="2"
CPU_THREADS="4"
CPU_MODEL="Haswell-noTSX"
CPU_FEATURE_ARGS="+ssse3,+sse4.2,+popcnt,+avx,+aes,+xsave,+xsaveopt,check"

REPO_PATH="/data/anton/QEMU/ultimate-macOS-KVM"
OVMF_DIR="/data/anton/QEMU/ultimate-macOS-KVM/ovmf"

VFIO_ID_0="$USR_VFIO_ID_0"
VFIO_ID_1="$USR_VFIO_ID_1"
VFIO_ROM="$USR_VFIO_ROM"

USB_DEVICES="$USR_USB_DEVICES"

NETWORK_DEVICE="vmxnet3"
MAC_ADDRESS="00:16:cb:00:21:09"

OS_ID="Monterey"

HDD_PATH="$REPO_PATH/HDD.qcow2"
DISK_TYPE="SSD"

#   You should not have to touch anything below this line, especially if you
#   don't really know what you're doing. It'll probably break something.

args=(
-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off
-enable-kvm -m "$ALLOCATED_RAM" -cpu "$CPU_MODEL",kvm=on,vendor=GenuineIntel,+invtsc,vmware-cpuid-freq=on,"$CPU_FEATURE_ARGS"
-machine q35
-boot menu=on,splash-time=5
#-device usb-ehci,id=ehci
#-device qemu-xhci,id=xhci
-usb -device usb-kbd -device usb-tablet
#USB_DEV_BEGIN
#USB_DEV_END
-smp "$CPU_THREADS",cores="$CPU_CORES",sockets="$CPU_SOCKETS"
-device pcie-root-port,bus=pcie.0,slot=1,x-speed=16,x-width=32
#VFIO_DEV_BEGIN
#VFIO_DEV_END
-device isa-applesmc,osk="ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc"
-drive if=pflash,format=raw,readonly=on,file="$OVMF_DIR/OVMF_CODE.fd"
-drive if=pflash,format=raw,file="$OVMF_DIR/OVMF_VARS.fd"
-smbios type=2
-device ich9-intel-hda -device hda-duplex
-device ich9-ahci,id=sata
-drive id=OpenCore,if=none,format=qcow2,file="$REPO_PATH/boot/OpenCore.qcow2"
-drive id=HDD,if=none,file="$HDD_PATH",format=qcow2
-device ide-hd,bus=sata.2,drive=OpenCore,bootindex=1
-device ide-hd,bus=sata.3,drive=HDD,rotation_rate=1

############## REMOVE THESE LINES AFTER MACOS INSTALLATION ###############
#-drive id=BaseSystem,if=none,file="$REPO_PATH/BaseSystem.img",format=raw
#-device ide-hd,bus=sata.4,drive=BaseSystem
##########################################################################

-netdev user,id=net0 -device "$NETWORK_DEVICE",netdev=net0,id=net0,mac="$MAC_ADDRESS"
-device qxl-vga,vgamem_mb=128,vram_size_mb=128
-monitor stdio
#-display none
#-vga qxl

################ UNCOMMENT IF YOU WANT TO USE VNC MONITOR ################
#-vnc 0.0.0.0:1,password=on -k en-us
##########################################################################

)

while getopts d: flag
do
    case "${flag}" in
        d) DISCORD_RPC=${OPTARG};;
    esac
done

if [ $VERBOSE = 1 ]
then
echo
echo \ \ \──────────────────────────────────────────────
echo \ \ \ \ \ $FILE
echo \ \ \ \ \ $ID $OS_ID
echo
echo \ \ \ \ \ Built with ULTMOS v$ULTMOS
echo \ \ \ \ \ Using $CPU_MODEL CPU model
if [ $REQUIRES_SUDO = 1 ]
then
echo \ \ \ \ \ Superuser privileges enabled
fi
if [ $VFIO_PTA = 1 ]
then
echo \ \ \ \ \ Passthrough enabled
else
echo \ \ \ \ \ Passthrough disabled
fi
if [ $DISCORD_RPC = 1 ]
then
echo \ \ \ \ \ Discord RPC enabled
else
echo \ \ \ \ \ Discord RPC disabled
fi
echo \ \ \──────────────────────────────────────────────
echo
fi

if [ $DISCORD_RPC = 1 ]
then
"$REPO_PATH/scripts/drpc.py" --os "$OS_ID" --pt $VFIO_DEVICES --wd "$REPO_PATH" --show "$DISCORD_RPC_IMG" &
fi

qemu-system-x86_64 "${args[@]}"

if [ $DISCORD_RPC = 1 ]
then
pkill -f drpc.py
fi```
aShabat commented

Rerun Autopilot, made 1 thread, but use old virtual disk. Error remains

eversiege commented

I think I see the problem, try setting CPU_THREADS as 2, see if that helps.

aShabat commented

Same error.

LuboGD commented

Here is my warning for comparison. The CPU/iGPU (AMD A6-5400B with Radeon HD 7540D Graphics) is so much less capable, I'm pleasantly surprised it works with High Sierra at all! Sometimes slowly, and sometimes freezes/crashes, but still chugs along. I may be able to eliminate "qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX.xsaveopt [bit 0]" by leaving it out of CPU_FEATURE_ARGS="+ssse3,+sse4.2,+popcnt,+avx,+aes,+xsave,+xsaveopt,check" but unsure if it would destabilize/slow things further, and the rest are simply due to lacking hardware, not sure there is any way to fix, unless patches like the one for avx2 might help? https://github.com/acidanthera/CryptexFixup

(qemu) qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.movbe [bit 22]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.rdrand [bit 30]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.fsgsbase [bit 0]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx2 [bit 5]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.smep [bit 7]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.bmi2 [bit 8]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.erms [bit 9]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.invpcid [bit 10]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX.xsaveopt [bit 0]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.movbe [bit 22]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.rdrand [bit 30]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.fsgsbase [bit 0]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx2 [bit 5]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.smep [bit 7]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.bmi2 [bit 8]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.erms [bit 9]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.invpcid [bit 10]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX.xsaveopt [bit 0]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.movbe [bit 22]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.rdrand [bit 30]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.fsgsbase [bit 0]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx2 [bit 5]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.smep [bit 7]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.bmi2 [bit 8]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.erms [bit 9]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.invpcid [bit 10]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX.xsaveopt [bit 0]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.movbe [bit 22]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.rdrand [bit 30]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.fsgsbase [bit 0]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx2 [bit 5]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.smep [bit 7]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.bmi2 [bit 8]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.erms [bit 9]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.invpcid [bit 10]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX.xsaveopt [bit 0]

Alfenstein8 commented

I also have this issue.
My Specs:

OS: Fedora release 40 (Forty) x86_64
Kernel: 6.10.10-200.fc40.x86_64
Uptime: 3 hours, 11 mins
Packages: 3963 (rpm), 136 (flatpak)
Shell: zsh 5.9
Resolution: 2560x1440, 1920x1080
DE: Plasma 6.1.5
WM: KWin
CPU: AMD Ryzen 7 2700X (16) @ 3.800GHz
GPU: NVIDIA GeForce RTX 2070 Rev. A
Memory: 7200MiB / 32006MiB

Console output:

  ──────────────────────────────────────────────
     boot.sh
     macOS Monterey

     Built with ULTMOS v0.12.4
     Using Haswell-noTSX CPU model
     Passthrough disabled
     Discord RPC enabled
  ──────────────────────────────────────────────

QEMU 8.2.6 monitor - type 'help' for more information
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.erms [bit 9]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.invpcid [bit 10]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.erms [bit 9]
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.invpcid [bit 10]

boot.sh setup:

ID="macOS"
NAME="macOS 12"
FILE="boot.sh"

ULTMOS=0.12.4
IGNORE_FILE=0
REQUIRES_SUDO=0
VFIO_PTA=0
VFIO_DEVICES=0
GEN_EPOCH=1731174040
FEATURE_LEVEL=7
VERBOSE=1
DISCORD_RPC=1
DISCORD_RPC_IMG="default"

SCREEN_RES="1280x720"

ALLOCATED_RAM="8G"
CPU_SOCKETS="1"
CPU_CORES="2"
CPU_THREADS="2"
CPU_MODEL="Haswell-noTSX"
CPU_FEATURE_ARGS="+ssse3,+sse4.2,+popcnt,+avx,+aes,+xsave,+xsaveopt,check"

REPO_PATH="/home/alfenstein/projects/ultimate-macOS-KVM"
OVMF_DIR="/home/alfenstein/projects/ultimate-macOS-KVM/ovmf"

VFIO_ID_0="$USR_VFIO_ID_0"
VFIO_ID_1="$USR_VFIO_ID_1"
VFIO_ROM="$USR_VFIO_ROM"

USB_DEVICES="$USR_USB_DEVICES"

NETWORK_DEVICE="vmxnet3"
MAC_ADDRESS="00:16:cb:00:21:09"

OS_ID="Monterey"

HDD_PATH="$REPO_PATH/HDD.qcow2"
DISK_TYPE="SSD"

When trying to boot:
image