Impossible to get rid of seams
Aresic opened this issue · 3 comments
Hello, I tried every options and I cant get rid of the seams on my image maybe im doing something wrong but I read the FAQ and im stiill not able to fix this.
I'm running on a AMD 6800xt GPU.
Here is my img2img tab :
here is the result if I try with img2img denoising at 1 to test the tiles :
and here you can see the kind of tiles I get (this was 512*512 tiles)
Help would be appreciated I really love this plugin.
unfortunatly the only workaround I found is to switch to linux.
I had this issue as well. Here's how you fix it. Make sure you also use ControlNet's Tile with it, try to duplicate my settings exactly, as these fixed my seams.
I see you use a different upscaler, that shouldn't be an issue - check the other settings too, if ControlNet alone doesn't fix it:
Make sure the tile size is a division of your height (respective width), and I also keep the height at the next smaller division.
For the WebUI parameters, I use these as I want as little change as possible (use your image seed as well as the positive and negative prompts too).
