CR-10 Schematic.pdf does not match CR-10 Motherboard.PCB
RudolphRiedel opened this issue · 1 comments
Thank you for making all this available!
I just found out about it, this would probably have stopped me from doing my own version.
But the provided CR-10 Schematic.pdf does not match CR-10 Motherboard.PCB.
The part names are all wrong, the controller is named U5 in your schematic but named U8 on the board.
I have not found a single part yet that has the same name in your CR-10 Schematic.pdf as in your CR-10 Motherboard.PCB.
Also the values for the components do not match and some values are even missing.
And some of the signal names to do not match as well.
Please do provide a schematic that matches the board file.
And please do consider providing the schematic in binary form as well as placement plan in .pdf for the board.
The header J5 clearly shows that the provided "CR-10 Schematic.pdf" is not for the V1.1.2 version of the board but for the earlier revision that did not have a revision printed on the silkscreen.
The V1.1.2 board does not have the jumper to switch 5V from VREG_5V to USB.