Web based administrative system for Snips devices Check out a short video on what this does and how to use it https://youtu.be/gGwnzSOB9Nc
if installing this to a RPi make sure to run "sudo apt-get update" for the latest files
#install pip
sudo apt-get install python-pip python-git python-setuptools python-dev libffi-dev
#update to the latest pip
pip install --upgrade pip
#clone this git
git clone https://github.com/oziee/snipsWebAdmin.git
#install deps
cd snipsWebAdmin
sudo pip install -r requirements.txt
#alter the settings.toml file in the base directory
change the MQTT settings to match as needed
#start
./boot.sh (good for using a service, also cleans up compiled pyc files for a fresh start)
else you can just use 'python snipsFlask.py'
(if it doesnt start you need to change the boot.sh to bootable.. only have to do this once)
chmod +x boot.sh
then run ./boot.sh again
Or you can create a service to start the console when the pi starts
#copy service file
sudo cp snipsWebAdmin.service /lib/systemd/system/snipsWebAdmin.service
sudo systemctl enable snipsWebAdmin.service
sudo systemctl start snipsWebAdmin.service