D3Engineering/d3-jetson-bsp

Issues

• AGX Orin FPD-Link™ III Interface Card 16x Support

  #38 opened a year ago by d4l3k
  9

• 6.1.0 not working tegra-xusb

  #37 opened a year ago by GrigoriyPeters
  2

• IMX390RCM sunex DSL239 192 HFOV (1000843-R) Dewarping using Deepstream

  #36 opened a year ago by jayben-2022
  0

• Adding set_mode_delay_ms in the camera sensor device-tree for IMX390RCM sunex DSL239 192 HFOV (1000843-R)

  #31 opened 2 years ago by jayben-2022
  15

• DS90UB960 output abnormal voltage during CSI2 HS transmission

  #34 opened 2 years ago by DesWudio
  3

• Problem with DTS configuration

  #35 opened 2 years ago by ZhouAllan
  1

• DS90UB960-Q1 no signal output

  #33 opened 2 years ago by ZhouAllan
  7

• Connection with a self-designed Radar board

  #32 opened 2 years ago by debrekXuHan
  3

• Distortion coeficient for IMX390 (1000843-R)

  #30 opened 2 years ago by shams265
  6

• Camera picture issue (Intermittent)

  #24 opened 2 years ago by ganindu7
  6

• Argus Installation on Jetson Xavier AGX

  #29 opened 2 years ago by vivekJB1
  1

• Any plans on supporting the OV10650

  #21 opened 2 years ago by Emmanuel-Messulam
  1

• AGX Orin support

  #25 opened 2 years ago by ganindu7
  2

• Is Jetson SERDES Sensor Interface card work with latest Jetpack 5.0.1 or 5.0.2

  #26 opened 2 years ago by vivekJB1
  2

• Help required to install BSP in my Jetson Xavier AGX for SerDes sensor interface card

  #28 opened 2 years ago by vivekJB1
  3

• ln: **failed to create hard link '/boot/active-dtb' => './d3-xavier-6x-serdes.dtb': Operation not permitted**

  #27 opened 2 years ago by vivekJB1
  4

• D3 Release 5.0.0 Not working with M.2 NvMe memory card attached to Xavier

  #23 opened 2 years ago by ganindu7
  9

• jmm api and patch in release 5.0.0

  #22 opened 2 years ago by ganindu7
  2

• New jetpack releases

  #20 opened 3 years ago by eliabruni
  2

• control using v4l library

  #19 opened 3 years ago by lubertRoft
  2

• Building D3 branch

  #18 opened 3 years ago by scrocker-amp
  2

• make sync fails with "Permission denied"

  #17 opened 3 years ago by scrocker-amp
  1

• Camera images from D3 Hardware > libargus > GStreamer pipeline

  #16 opened 3 years ago by ganindu7
  5

• d3-install-dtb

  #15 opened 3 years ago by qodlsrud20712
  2

• .dts file missing from submodules? (when making the kernel)

  #14 opened 4 years ago by ganindu7
  19

• Set up os support on target

  #13 opened 4 years ago by ganindu7
  2

• Support for FPD Link iii.

  #12 opened 4 years ago by AjithKumaresh4
  6

• Build ID mismatch

  #2 opened 4 years ago by D3-growe
  1

• Probe function not called

  #10 opened 4 years ago by MaximumProgrammer
  6

• Yocto support for D3

  #9 opened 4 years ago by RomainNaour
  1

• D3_BUILDID doesn't build with recent compiler

  #11 opened 4 years ago by RomainNaour
  1

• Rebuilding Device Tree with Kernel

  #8 opened 4 years ago by MaximumProgrammer
  15

• nvgstcapture-1.0: fence issue

  #7 opened 4 years ago by RomainNaour
  7

• d3-jetson-bsp-3.0.1.zip content is not in sync with the branch d3/3.0.1

  #6 opened 4 years ago by RomainNaour
  1

• FATAL ERROR: Unable to parse input tree

  #5 opened 4 years ago by Ihor-sii
  6

• White pixel line

  #4 opened 5 years ago by g-towboat
  1

• Sensor resolution /fps

  #3 opened 5 years ago by g-towboat
  2

• problems with .gitmodules

  #1 opened 5 years ago by g-towboat
  5