Compatibility problem with OpenModelica
Closed this issue · 4 comments
Hello,
First of all, thank you for this library which is invaluable for modelling noise in sensor measurements.
I'm currently using it with Dymola 2015 and it works great but alas, it always crash when compiling under OpenModelica (with version 1.9.2 it just crashes, with 1.9.6 it fails to compile with a number of errors). As we want to shift from Dymola to OpenModelica for obvious cost reasons, I would like to be able to run this library under OpenModelica.
Is it a known bug or compatibility problem that can be resolved easily ?
I'm using the version of "Noise library" that comes with the OpenModelica installer.
Here is the logbook of the failed compilation :
Noise_compilation_fail_openmodelica.txt
Thank you all for your help,
Corentin
Also, as this library is currently being integrated into MSL 3.2.2, there might be a few inconsistencies between the vendors' compiled libraries, the official MSL C-code and our C-code. You might want to just wait a few weeks, until the MSL 3.2.2 is released and re-check then. But as @tbeu said, the actual OpenModelica developers will have the better insight in this process.
@bravach MSL 3.2.2 is released. You might try the noise models that are now part of this MSL.
I am closing this issue, as Noise is now maintained as part of the MSL. If your issue still persists, please report it to the Modelica bug tracker (https://trac.modelica.org/Modelica) and/or the OpenModelica bug tracker (https://trac.openmodelica.org/OpenModelica).