Achieving connectivity between sensors and modules with LPC845-BRK

[Danmuse]

This task consists of developing the libraries of the modules used in the system that interface with the LPC845-BRK controller. The process typically includes the following:

• Understanding the available communication interfaces. General knowledge of the communication interfaces supported by the LPC845-BRK development board, including I²C, SPI, UART and GPIO.
• Configuration and initialization of the communication interfaces. Configure the required baud rates, clock settings and initialization routines on each module to ensure that the interfaces are configured correctly.
• Establishing communication protocols. Implementation of communication protocols, such as I²C or SPI, to facilitate smooth data exchange between the LPC845-BRK and connected sensors or modules.
• Troubleshooting and debugging. Detecting any problems or unexpected behavior during connectivity setup, this topic seeks guidance on troubleshooting techniques and best practices.

NOTE: The components used in the hardware are discriminated in Identification of the sensors, modules and controllers used.

[Danmuse]

All members have spent ten hours learning and testing the operation of GPIOs, the System Tick Timer, and the usage of Callbacks. Work continues on the induction and incorporation of Callbacks, Timers and communication protocol libraries between modules.