No audio

Question

No audio

Opened this issue a year ago · 4 comments

Hi!
Finally uploading worked :-)
Have connection via the Web interface, can change channels but if have no audio output.
Checked in conf the vs1053 settings:
pin_vs_cs = 5 # GPIO Pin number for VS1053 "CS"
pin_vs_dcs = 16 # GPIO Pin number for VS1053 "DCS"
pin_vs_dreq = 4 # GPIO Pin number for VS1053 "DREQ"
(Have no rotary encoder installed...)

Tips
Hartelijk dank/thanks
AJ

Answer 1 · 2023-06-07T08:45:21.000Z

In the logging, do you see the following lines without errors:

[ 11734][I][VS1053.cpp:127] testComm(): [VS1053] Slow SPI, Testing VS1053 read/write registers...
[ 11982][I][VS1053.cpp:127] testComm(): [VS1053] Fast SPI, Testing VS1053 read/write registers again...

This will test the SPI bus connection to the VS1053.

Answer 2 · 2023-06-07T11:07:42.000Z

Hi!
Thanks, now it works a small wire mistake :-) Thanks for the nice project!
Hartelijk dank vanuit Oslo!
AJ

Answer 3 · 2024-03-01T20:50:37.000Z

I am getting the SPI error, no audio. Using the exact pin out in the main file. Update config file, using Esp32, VS1053 (dated 2022-11-18), and a TFT with 9341.

The TFT is displaying correctly but no audio.

I hacked together the esp8266 library with the same pinouts and it plays the audio. Any clues would be great.

Answer 4 · 2024-03-01T21:33:03.000Z

I am getting the SPI error, no audio. Using the exact pin out in the main file. Update config file, using Esp32, VS1053 (dated 2022-11-18), and a TFT with 9341.

The TFT is displaying correctly but no audio.

I hacked together the esp8266 library with the same pinouts and it plays the audio. Any clues would be great.

I found the issue: I unplugged the display and I got audio. I had the touch pins connected to the ESP32. As soon as I disconnected them everything works.