OptiType

Precision HLA typing from next-generation sequencing data

Authors: András Szolek, Benjamin Schubert, Christopher Mohr
Date: April 2014
Version: 1.3.3
License: OptiType is released under a three-clause BSD license

Introduction

OptiType is a novel HLA genotyping algorithm based on integer linear programming, capable of producing accurate 4-digit HLA genotyping predictions from NGS data by simultaneously selecting all major and minor HLA Class I alleles.

Requirements

OptiType uses the following software and libraries:

Python 2.7
RazerS 3.4
SAMtools 1.2
HDF5 1.8.15
CPLEX 12.5 or other Pyomo-supported ILP solver (GLPK, CBC, ...)

And the following Python modules:

NumPy 1.9.3
Pyomo 4.2
PyTables 3.2.2
Pandas 0.16.2
Pysam 0.8.3
Matplotlib 1.4.3
Future 0.15.2

Note: CPLEX has a proprietary license but is free for academic use. See IBM's academic initiative.

Installation via Docker

Install Docker on your computer and make sure it works.
Call docker pull fred2/optitype which will download the Docker image.
You can use the image as followes:

docker run -v /path/to/data/folder:/data/ -t fred2/optitype -i input1 [input2] (-r|-d) -o /data/

OptiType uses the CBC-Solver and RazerS3 internally with one thread if no other configuration file is provided. RazerS3's binary can be found at /usr/local/bin within the Docker image.

Installation from Source

Install all required software and libraries from the first list.
Include SAMtools and your ILP solver in your PATH environment variable. They both have to be globally accessible every time you run OptiType, so make them permanent (put in in your .bashrc or similar shell startup script).
Add HDF5's lib directory to your LD_LIBRARY_PATH. Make sure it's permanent too.
Create and activate a Python virtual environment with the package virtualenv. This will automatically install the package manager pip which you will need for the next steps. Always run OptiType from this virtual environment.

Install NumPy, Pyomo, Pysam and Matplotlib with the following commands:

pip install numpy
pip install pyomo
pip install pysam
pip install matplotlib

Create a new environment variable containing the path to your HDF5 installation. It doesn't have to be permanent, but it has to be accessible when you install PyTables. On the bash shell it would be export HDF5_DIR=/path/to/hdf5-1.8.15

Install PyTables, Pandas and Future with

pip install tables
pip install pandas
pip install future

Create a configuration file following config.ini.example. You will find all necessary instructions in there. OptiType will look for the configuration file at config.ini in the same directory by default, but you can put it anywhere and pass it with the -c option when running OptiType.

Usage

Optional step zero: you might want to filter your sequencing data for HLA reads. Should you have to re-run OptiType multiple times on the same sample (different settings, etc.) it could save you time if instead of giving OptiType the full, multi-gigabyte sequencing data multiple times, you would rather give it the relevant reads only, on the order of megabytes.

You can use any read mapper to do this step, although we suggest you use RazerS3. Its only drawback is that due to way RazerS3 was designed, it loads all reads into memory, which could be a problem on older, low-memory computing nodes.

Make sure to filter your files correctly depending on whether you have DNA (exome, WGS) or RNA-Seq data. The reference fasta files are data/hla_reference_dna.fasta and data/hla_reference_rna.fasta respectively. Below is an example for DNA sequencing data:

>razers3 -i 95 -m 1 -dr 0 -o fished_1.bam /path/to/OptiType/data/hla_reference_dna.fasta sample_1.fastq

>samtools bam2fq fished_1.bam > sample_1_fished.fastq

>rm fished_1.bam

If you have paired-end data, repeat this with the second ends' fastq file as well. Note: it's important that you filter the two ends individually. Don't use the read mapper's paired-end capabilities.

After the optional filtering, OptiType can be called as follows:

>python /path/to/OptiTypePipeline.py -i sample_fished_1.fastq [sample_fished_2.fastq]
                    (--rna | --dna) [--beta BETA] [--enumerate N]
                    [-c CONFIG] [--verbose] --outdir /path/to/out_dir/

This will produce a time-stamped directory inside the specified output directory containing a CSV file with the predicted optimal (and if enumerated, sub-optimal) HLA genotype, and a pdf file containing a coverage plot of the predicted alleles for diagnostic purposes.

>python OptiTypePipeline.py --help  

usage: OptiType [-h] --input FQ [FQ] (--rna | --dna) [--beta B]
                [--enumerate N] --outdir OUTDIR [--verbose] [--config CONFIG]

OptiType: 4-digit HLA typer

optional arguments:
  -h, --help            show this help message and exit
  --input FQ [FQ], -i FQ [FQ]
                        .fastq file(s) (fished or raw) or .bam files stored
                        for re-use, generated by an earlier OptiType run. One
                        file: single-end mode, two files: paired-end mode.
  --rna, -r             Use with RNA sequencing data.
  --dna, -d             Use with DNA sequencing data.
  --beta B, -b B        The beta value for for homozygosity detection (see
                        paper). Default: 0.009. Handle with care.
  --enumerate N, -e N   Number of enumerations. OptiType will output the
                        optimal solution and the top N-1 suboptimal solutions
                        in the results CSV. Default: 1
  --outdir OUTDIR, -o OUTDIR
                        Specifies the out directory to which all files should
                        be written.
  --prefix PREFIX, -p PREFIX
                        Specifies prefix of output files
  --verbose, -v         Set verbose mode on.
  --config CONFIG, -c CONFIG
                        Path to config file. Default: config.ini in the same
                        directory as this script

Furthermore, depending on your settings in config.ini you can choose to keep the bam files OptiType produces when all-mapping reads against the reference: these will be stored in the output directory of your current run.

Then, if you want to re-run OptiType on the same sample, you can give it those intermediate .bam files as input instead of .fastq files, and spare on the mapping part of the pipeline. Note: these .bam files have nothing to do with those produced during the filtering/fishing step.

Test examples

DNA data (paired end):

python OptiTypePipeline.py -i ./test/exome/NA11995_SRR766010_1_fished.fastq ./test/exome/NA11995_SRR766010_2_fished.fastq --dna -v -o ./test/exome/

RNA data (paired end):

python OptiTypePipeline.py -i ./test/rna/CRC_81_N_1_fished.fastq ./test/rna/CRC_81_N_2_fished.fastq --rna -v -o ./test/rna/

Contact

András Szolek
szolek@informatik.uni-tuebingen.de
University of Tübingen, Applied Bioinformatics,
Center for Bioinformatics, Quantitative Biology Center,
and Dept. of Computer Science,
Sand 14, 72076 Tübingen, Germany

Reference

Szolek, A, Schubert, B, Mohr, C, Sturm, M, Feldhahn, M, and Kohlbacher, O (2014). OptiType: precision HLA typing from next-generation sequencing data Bioinformatics, 30(23):3310-6.

FRED-2/OptiType