Detect DVT1 vs DVT2 ledmatrix by checking led layout
JohnAZoidberg opened this issue · 2 comments
JohnAZoidberg commented
LED controller has short circuit detection which we should be able to use.
Then we can combine into a single firmware.
JohnAZoidberg commented
JohnAZoidberg commented
WIP at: https://github.com/FrameworkComputer/inputmodule-rs/tree/open-short
On the old module I expect it to output:
Open 0x03: 00, Open 0x07: 7C, Open 0x08: 00, Open 0x0C: 7C, Open 0x2B: 00, Open 0x2F: 7C
Short0x03: 00, Short0x07: 00, Short0x08: 00, Short0x0C: 00, Short0x2B: 00, Short0x2F: 00
On my intentionally broken module (x:0,y:0 no led - x:1,y:0 short) I expect:
Open 0x03: 01, Open 0x07: 7C, Open 0x08: 00, Open 0x0C: 7C, Open 0x2B: 00, Open 0x2F: 7C
Short0x03: 00, Short0x07: 02, Short0x08: 00, Short0x0C: 00, Short0x2B: 00, Short0x2F: 00
On the early matrix these are connected and the reset are open, no shorts:
Therefore the lowest two bits (CS33, CS34) on 0x07 and 0x0C should be 0, as well as the highest (reserved).