Freenove/Freenove_Big_Hexapod_Robot_Kit_for_Raspberry_Pi

Issues

• Installation issue - setup.py fails repeatedly

  #34 opened 5 months ago by SurfCityMojo
  1

• Error 5

  #33 opened a year ago by Jomaka37
  1

• Playing audio

  #32 opened a year ago by drperpen
  2

• camera not working on latest raspbian

  #31 opened a year ago by mware25
  1

• Code/Server/Server.py get_interface_ip() fails on RasPi 4 with Raspberry Pi OS Bookworm

  #30 opened a year ago by emendir
  5

• camera.py fails on RasPi 4 with Raspberry Pi OS Bookworm

  #29 opened a year ago by emendir
  5

• Rpi4B OS - Is debian compatible ?

  #27 opened 2 years ago by philippeFernandez
  1

• Wiring diagram

  #28 opened 2 years ago by philippeFernandez
  0

• Big Hexapod Robot Raspberry Pi 3 or 4?

  #26 opened 2 years ago by RedWolfFan1
  1

• i2cdetect -y 1 with nothing. is it normal ?

  #9 opened 3 years ago by Sam-saidane
  5

• Please use the native way to set Python3 as default

  #16 opened 3 years ago by jwupf
  2

• Missing .ui files

  #24 opened 2 years ago by stieler-it
  1

• Calibration data not saved fully

  #19 opened 2 years ago by piotrrusiecki
  1

• Help woth installing autostart

  #22 opened 2 years ago by IGRam93
  1

• Chassis laser cut stencil .dwg available?

  #21 opened 2 years ago by seggybop
  1

• Code duplication in ui_client.py

  #20 opened 3 years ago by piotrrusiecki
  2

• ADCDevice.py update

  #17 opened 3 years ago by ICEconchy
  0

• Tutorial.pdf, page 73, 4P cable

  #15 opened 3 years ago by virtadpt
  0

• Tutorial.pdf, page 75, unclear instructions

  #14 opened 3 years ago by virtadpt
  0

• Tutorial.pdf page 75(71), ultrasonic module, screw is actually M1.4 x 6

  #12 opened 3 years ago by aaronxu106
  1

• apt-get update issue

  #13 opened 3 years ago by aaronxu106
  0

• QPushButton not working on MacOS 12.1 (macOS Monterey)

  #10 opened 3 years ago by rherbrich74
  1

• main.py crashes

  #8 opened 3 years ago by AlexeyBossak
  2

• FileNotFoundError: [Errno 2] No such file or directory

  #7 opened 3 years ago by Snowstorm1711
  3

• Control.run() data parameters?

  #6 opened 3 years ago by FleetPhil
  0

• Control board schematic

  #5 opened 3 years ago by simoninns
  1

• Unclear instructions in Tutorial.pdf page 57

  #4 opened 3 years ago by simoninns
  3

• Unclear software licensing

  #3 opened 3 years ago by simoninns
  4

• CPU / Battery usage

  #2 opened 4 years ago by haakoni
  1

• Tutorial PDF Servo connection shows servo 9 as 6 in image

  #1 opened 4 years ago by Nutrafin
  0