Using repeater mode 2 - hangs on establishing handshake.
Opened this issue · 1 comments
GoogleCodeExporter commented
What steps will reproduce the problem?
1. Setting uvncrepeater in mode 2
2. connecting server to the repeater (server is behind firewall)
3. connecting android-vnc do repeaterer
What is the expected output? What do you see instead?
Connecting...
Establishing handshake.
Please wait...
What version of android-vnc-viewer are you using?
0.5.0
Which VNC server/version are you using? On which platform?
UltraVNC Win32 Server SC 20.3, on Windows XP SP3
What device are you using?
Sony Ericsson Xperia Arc S (X12)
Are you using a custom ROM? If so, which?
none
Please provide any additional information below.
FAQ says how to configure connection using ultravnc repeater in mode 1, and I
want to use mode 2. Using this mode both client and server may be behind
firewalls, and repeater may be completely somewhere else.
When connecting from desktop I'm using command (and it works!):
vncviewer.exe -connect ID:6969 -proxy repeater.address.com:5900
Connection configuration of androidvnc:
server:
repeater.address.com
port:
5900
Repeater:
ID:6969
Server is the SC (Single Click) version configured like following
(helpdesk.txt):
[HOST]
Connection
-id 6969 -connect repeater.address.com -noregistry
Repeater is Linux version configured like fallowing (/etc/uvncrepeater.ini):
[general]
;Ports
viewerport = 5900
serverport = 5500
maxsessions = 4
logginglevel = 3
allowedmodes = 2
[mode2]
requirelistedid = 1
idlist0 = 6969
Log from repeater as fallowing (/var/log/uvncrepeater.log):
# AFTER CONNECTING SERVER:
UltraVnc Sun Nov 6 14:29:46 2011 > acceptConnection(): connection accepted ok
from ip: server.address.com
UltraVnc Sun Nov 6 14:29:46 2011 > nonBlockingRead(): start
UltraVnc Sun Nov 6 14:29:46 2011 > nonBlockingRead(): returning normally
UltraVnc Sun Nov 6 14:29:46 2011 > parseId(): IdCode = ID:6969
UltraVnc Sun Nov 6 14:29:46 2011 > acceptConnection(): Server sent code 6969
UltraVnc Sun Nov 6 14:29:46 2011 > findDuplicateIdIndex(): similar ID not found
UltraVnc Sun Nov 6 14:29:46 2011 > isCodeInIdList(): ID code match found (6969)
UltraVnc Sun Nov 6 14:29:46 2011 > addServerList(): Server added to list: code
= 6969, index = 0
UltraVnc Sun Nov 6 14:29:46 2011 > findViewerList(): Warning, viewer not found
(code = 6969)
UltraVnc Sun Nov 6 14:29:46 2011 > acceptConnection(): respective viewer has
not connected yet
UltraVnc Sun Nov 6 14:29:46 2011 > nonBlockingRead(): start
UltraVnc Sun Nov 6 14:29:51 2011 > nonBlockingRead(): returning 12 bytes
UltraVnc Sun Nov 6 14:29:51 2011 > readPeerHandShake(): len = 12
# AFTER TRYING TO CONNECT androidvnc
UltraVnc Sun Nov 6 14:29:58 2011 > routeConnections(): new viewer connecting,
accepting...
UltraVnc Sun Nov 6 14:29:58 2011 > acceptConnection(): connection accepted ok
from ip: client.address.com
UltraVnc Sun Nov 6 14:29:58 2011 > acceptConnection(): pv = RFB 000.000
UltraVnc Sun Nov 6 14:29:58 2011 > writeExact(): start
UltraVnc Sun Nov 6 14:29:58 2011 > writeExact(): returning normally
UltraVnc Sun Nov 6 14:29:58 2011 > nonBlockingRead(): start
UltraVnc Sun Nov 6 14:29:59 2011 > nonBlockingRead(): returning normally
UltraVnc Sun Nov 6 14:29:59 2011 > parseId(): IdCode = ID:6969
UltraVnc Sun Nov 6 14:29:59 2011 > acceptConnection(): Viewer sent code 6969
UltraVnc Sun Nov 6 14:29:59 2011 > findDuplicateIdIndex(): similar ID not found
UltraVnc Sun Nov 6 14:29:59 2011 > isCodeInIdList(): ID code match found (6969)
UltraVnc Sun Nov 6 14:29:59 2011 > addViewerList(): Viewer added to list: code
= 6969, index = 0
UltraVnc Sun Nov 6 14:29:59 2011 > findServerList(): server found at index 0,
code = 6969
UltraVnc Sun Nov 6 14:29:59 2011 > setViewerActive(): activated viewer at
index 0, code = 6969
UltraVnc Sun Nov 6 14:29:59 2011 > setServerActive(): activated server at
index = 0, code = 6969
UltraVnc Sun Nov 6 14:29:59 2011 > writeExact(): start
UltraVnc Sun Nov 6 14:29:59 2011 > writeExact(): returning normally
UltraVnc Sun Nov 6 14:29:59 2011 > addRepeaterProcList(): Added proc to
index=0, pid=30737, code=6969
UltraVnc Sun Nov 6 14:29:59 2011 > forkRepeater(): in child process, starting
doRepeater(5, 6)
Original issue reported on code.google.com by mirek.sz...@gmail.com on 6 Nov 2011 at 1:39
GoogleCodeExporter commented
Just realised, that it works fine with normal version of vncserver (not SC)
after using the "add new client" option, specifing repeater as the client.
Original comment by mirek.sz...@gmail.com on 6 Nov 2011 at 1:56