ASR Microelectronics ASR605x (ASR6501, ASR6502): development platform for PlatformIO

This development platform is deprecated and won't receive any further updates.

Please use the heltec-cubecell development platform as the drop-in replacement:

[env:yourenv]
platform = heltec-cubecell
framework = arduino
board = your_board_id

ASR Microelectronics ASR605x series is highly integrated and ultra low power SoC based on the PSoC 4000 series MCU (ARM Cortex M0+ Core) and Semtech SX1262 transceiver.

Home (home page in the PlatformIO Registry)
Documentation (advanced usage, packages, boards, frameworks, etc.)

Usage

Install PlatformIO
Create PlatformIO project and configure a platform option in platformio.ini file:

Stable version

[env:stable]
platform = asrmicro650x
board = ...
...

Development version

[env:development]
platform = https://github.com/HelTecAutomation/platform-asrmicro650x.git
board = ...
...

Configuration

LoRaWAN

LoRaWAN protocol can be configured in https://docs.platformio.org/en/latest/projectconf/index.html using the following syntax board_build.arduino.lorawan.* where * is an option from the following list:

Option	Description	Possible values	Default
`region`	Region definition	`AS923_AS1`, `AS923_AS2`, `AU915`, `CN470`, `CN779`, `EU433`, `EU868`, `KR920`, `IN865`, `US915`, `US915_HYBRID`	`US915`
`class`	Device class	`CLASS_A`, `CLASS_C`	`CLASS_A`
`netmode`	Activation method	`OTAA`, `ABP`	`OTAA`
`adr`	Adaptive Data Rate	`ON`, `OFF`	`ON`
`uplinkmode`	Uplink confirmed/unconfirmed messages	`CONFIRMED`, `UNCONFIRMED`	`CONFIRMED`
`net_reserve`	Don't rejoin after reset	`ON`, `OFF`	`OFF`
`at_support`	AT commands support	`ON`, `OFF`	`ON`
`rgb`	RGB light for LoRaWAN status	`ACTIVE`, `DEACTIVE`	`ACTIVE`
`preamble_length`	Preamble length	`8`, `16` (For M00 and M00L)	`8`
`debug_level`	Print LoRaWAN relevant messages print to serial port	`NONE`, `FREQ` (Sending/receiving frequency), `FREQ_AND_DIO` (Sending/receiving frequency and DIO pin interrupt information)	`NONE`

Example

[env:cubecell_board]
platform = asrmicro650x
framework = arduino
board = cubecell_board
board_build.arduino.lorawan.region = EU433
board_build.arduino.lorawan.adr = OFF
board_build.arduino.lorawan.debug_level = FREQ_AND_DIO

More information about LoRaWAN configuration can be found in the official CubeCell documentation.