Read this in other languages: English, [譌･譛ｬ隱枉(README.ja.md)
Camera Module products equipped with OIS
CA378-AOIS Software Setup Guide v1.0.3 for Jetson TX2
CA378-AOIS Software Setup Guide v1.0.4 for Raspberry Pi 3
CA378-AOIS MIPI-2L v1.1.5 for Jetson TX2 (L4T 28.2/L4T 28.2.1)
- Support for Jetpack 3.2.1 / Jetpack 3.3
CA378-AOIS MIPI-2L v1.1.0 for Jetson TX2 (L4T 28.2-rc)
- Support for Jetpack 3.2
CA378-AOIS MIPI-2L v1.0.3 for Jetson TX2 (L4T 27.1) (Support for Jetpack 3.0)
- Fixed installation problem
CA378-AOIS MIPI-2L v1.0 for Jetson TX2 (L4T 27.1) (Support for Jetpack 3.0)
- Image Format: 10bit RAW for MIPI-2Lane
- Resolutions and Framerates: 4056x3040@30fps, 3840x2160@30fps, 1920x1080@120fps
- Multi camera display (Support only 6 connected multiple cameras)
CA378-AOIS Sample code v1.1.5 for Jetson TX2 (L4T 28.2/L4T 28.2.1)
- Support for Jetpack 3.2.1 / Jetpack 3.3
CA378-AOIS Sample code v1.1.0 for Jetson TX2 (L4T 28.2-rc)
- Support for Jetpack 3.2
CA378-AOIS Sample code v1.0.0 for Jetson TX2
CA378-AOIS Sample code v1.0.4 for Raspberry Pi 3 (Support for SSP library 1.31)
- Support for Raspbian 2018-11-13, SSP library 1.31
CA378-AOIS Sample code v1.0.3 for Raspberry Pi 3 (Support for SSP library 1.31)
- Added Raspbian configuration procedure
CA378-AOIS Sample code v1.0.2 for Raspberry Pi 3 (Support for SSP library 1.31)
- Update Installation Guide
CA378-AOIS Sample code v1.0.1 for Raspberry Pi 3 (Support for SSP library 1.28)
- Added optical black correction for RAW to DNG conversion
CA378-AOIS Sample code v1.0.0 for Raspberry Pi 3 (Support for SSP library 1.28)