Missing devices Evo home uk
Closed this issue · 2 comments
Hi Might be a setup issue on my part.
Set up and used a ramses-esp to snoop on my Evohome with the esp in WiFi mqto setup as my ha is on a VM machine.
Left everything as default setting up the Ramses-esp and Ramses RF and just locally linked RF to my ha broker within ha and that has found every device by the looks of it great 👍.
In the 24h I have had this running I have lost trv's on my Evohome controller and the dhw temperature sensor from the system a quick power cycle restored these or they eventually come back by themselves.
My understanding was that Ramses-esp and the Ramses RF default set up was passive snooping with no active acknowledgement if this is incorrect I will have to reassess my settings.
firmware = ramses_esp
version = 0.4.9
All devices were stable and good signal levels until adding the Ramses esp unit and Ramses rf.
Having a look it looks like the Ramses RF is sending commands out to the Ramses esp on mqto so will look in to Ramses RF instead.