No Supported memory for Samsung

Question

No Supported memory for Samsung

shrik8968 opened this issue 4 years ago · 10 comments

Attached screenshot is the error I'm receiving when trying to mod my GPU, the one that is working for samsung is for K4G80325FB (SAMSUNG), but my GPU has K4G80325FC (SAMSUNG_2). It is a different version

Answer 1 · 2020-06-27T22:14:12.000Z

I have the latest version 1.7.3

Answer 2 · 2020-06-27T22:16:33.000Z

shrik8968 commented 4 years ago

Answer 3 · 2020-06-27T23:01:02.000Z

Found out the device id is new and it is not present in PolarisBiosEditor.cs. The new id is x1002

Answer 4 · 2020-07-01T19:46:52.000Z

Strange, according to picture you have posted, PBE is detected Samsung_2 correctly and even applied modded timings at 1750 and 2000 Mhz. So it should be showing no error at all. Anyone else with this problem?
I only got some complaints for stability issue with these timings... but there are 2 for that so try both. Also timing strap for K4G80325FC in PBE 3 Pro 2020 is the most stable of them and of course performing a bit better. Still it isn't top notch, but good enough.

Answer 5 · 2020-07-09T20:38:09.000Z

Yes I'm experiencing the same issue

Answer 6 · 2020-07-12T14:11:08.000Z

@raypnut upload your bios please. There is bug with indexing, which I forget to fix, but it shouldn't be a problem except the wrong index number.

Answer 7 · 2020-07-14T08:32:10.000Z

Thanks for your reply @IndeedMiners ! This is the bios:
Bios_RX_580.zip

Answer 8 · 2020-07-14T11:05:45.000Z

@raypnut thanks for the upload. I will debug that later. It might actually be because of the indexing or I forget something else will check that... But anyway, it applies correct timings so you can try to flash it to your card, it should be working with no issue.

Answer 9 · 2020-07-21T09:59:25.000Z

Should be fixed in 1.7.4, please test.

Answer 10 · 2020-07-24T09:53:19.000Z

Fixed in 1.7.4