Infineon/XMC-for-Arduino

Arduino IDE can't connect XMC_1100_2GO

hubertlxb opened this issue · 5 comments

hubertlxb commented

I follow all the procedures to configure the Arduino.
However, arduino indicate that the XMC 1100 is not in the COM.
图片
In additon, the J-link driver was installed,

techpaul commented

Have you selected the correct COM port ?

COM3 seems surprisingly LOW number for a USB device..

On MY system the USB devices come up in the COM30 to COM50 range when i do

Tools --> Port

I get for a XMC1000 2Go the list
COM1
COM2
COM47

hubertlxb commented

Hi Paul,

thanks for your support!
I changed the Port number, but it still doesn't work.

捕获
捕获1
捕获2
捕获4
捕获5

techpaul commented

This suggests that something is not connected properly or has broken connection to the XMC11002Go or on the board

I have no problems with multiple XMC2Go boards

Have you checked Wiki for 64 bit system issues?

Have you tried compiling and uploading a blank sketch?

Copy the TEXT not picture of error messages

hubertlxb commented

tried compiling and uploading a blank sketch, but the error is still there.
following you can find the TEXT message.

Infineon XMC Flasher Lite
Copyright Infineon Technologies 2017

Windows 10
Operating System: Windows 10

Initialisation

Windows 10

[Error] Infineon.DebuggerExceptions: It seems that JLink software is not installed please download from www.segger.com and install it. You can specify it by setting java property xmcFlasher.JLink.dllPath
Error downloading https://github.com/Infineon/XMC-for-Arduino/releases/latest/download/package_infineon_index.json