missing dependency with ddynamic_reconfigure
Closed this issue · 27 comments
on the last updates, the dependency folder ddynamic_reconfigure has changed the name to realsense2_description. However, the CMakeLists.txt on those updates (tags 2.2.5 and later) still link to ddynamic_reconfigure (lines 18 and 76), which creates the following error:
CMake Error at /opt/ros/kinetic/share/catkin/cmake/catkinConfig.cmake:83 (find_package):
Could not find a package configuration file provided by
"ddynamic_reconfigure" with any of the following names:
ddynamic_reconfigureConfig.cmake
ddynamic_reconfigure-config.cmake
Maybe it passes the test based on some cached build, but this is clearly a broken dependency link.
Hi,
A couple of changes happened.
- The folder ddynamic_reconfigure was removed in favor of the newly released debian package ddynamic_reconfigure.
- The folder realsense2_camera was split to realsense2_camera and realsense2_description, for reducing the package basic size.
Therefor, the fix for the error is
apt-get update apt-get install ros-kinetic-ddynamic-reconfigure
@doronhi
I had the same catkin build error as tanismar, and ran:
sudo apt-get update
sudo apt-get install ros-kinetic-ddynamic-reconfigure
Then I get the following error:
Err:1 http://packages.ros.org/ros/ubuntu xenial/main amd64 ros-kinetic-ddynamic-reconfigure amd64 0.2.0-0xenial-20190325-154841-0800
404 Not Found [IP: 64.50.233.100 80]
E: Failed to fetch http://packages.ros.org/ros/ubuntu/pool/main/r/ros-kinetic-ddynamic-reconfigure/ros-kinetic-ddynamic-reconfigure_0.2.0-0xenial-20190325-154841-0800_amd64.deb 404 Not Found [IP: 64.50.233.100 80]
I am testing with a D435 and T265, both now working in the Realsense Viewer after I upgraded the firmware on the D435 to 05.11.01.100. The T265 didn't require any firmware update (Just FYI).
@doronhi
Further info:
I am running:
Ubuntu 16.04LTS 64-bit
Intel® Core™ i7-6700TE CPU @ 2.40GHz × 8
Intel® HD Graphics 530 (Skylake GT2)
8GB memory
When running the following commands, I get...
command: modinfo uvcvideo | grep "version:"
version: 1.1.2.realsense-1.3.5
srcversion: 3286F64D5B1431E64E8C37C
command: sudo apt-get update
Ign:1 http://dl.google.com/linux/chrome/deb stable InRelease
Hit:2 http://dl.google.com/linux/chrome/deb stable Release
Hit:3 http://us.archive.ubuntu.com/ubuntu xenial InRelease
Hit:4 http://archive.canonical.com/ubuntu xenial InRelease
Get:5 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
Get:7 http://us.archive.ubuntu.com/ubuntu xenial-updates InRelease [109 kB]
Hit:8 http://packages.osrfoundation.org/gazebo/ubuntu-stable xenial InRelease
Get:9 http://packages.ros.org/ros/ubuntu xenial InRelease [4,678 B]
Hit:10 http://linux.teamviewer.com/deb stable InRelease
Hit:11 http://realsense-hw-public.s3.amazonaws.com/Debian/apt-repo xenial InRelease
Hit:12 http://linux.teamviewer.com/deb preview InRelease
Hit:13 http://us.archive.ubuntu.com/ubuntu xenial-backports InRelease
Err:9 http://packages.ros.org/ros/ubuntu xenial InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY F42ED6FBAB17C654
Fetched 223 kB in 1s (186 kB/s)
Reading package lists... Done
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://packages.ros.org/ros/ubuntu xenial InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY F42ED6FBAB17C654
W: Failed to fetch http://packages.ros.org/ros/ubuntu/dists/xenial/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY F42ED6FBAB17C654
W: Some index files failed to download. They have been ignored, or old ones used instead.
A new GPG keys were deployed for packages.ros.org.
Follow the instructions here
In short, do the following:
sudo apt-key adv --keyserver 'hkp://keyserver.ubuntu.com:80' --recv-key C1CF6E31E6BADE8868B172B4F42ED6FBAB17C654
sudo apt-key del 421C365BD9FF1F717815A3895523BAEEB01FA116
And now try
sudo apt-get update
again.
After that install ddynamic_reconfigure package.
And if I'm using ros melodic on Ubunto 18.04.2?
This package used to work with melodic, but now the ddynamic_reconfigure is missing and I can't find it for melodic distribution.
@doronhi
Thank you for the updated key. Still getting an error on update:
W: The repository 'http://realsense-hw-public.s3.amazonaws.com/Debian/aptrepo xenial Release' does not have a Release file.
N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.
N: See apt-secure(8) manpage for repository creation and user configuration details.
E: Failed to fetch http://realsense-hw-public.s3.amazonaws.com/Debian/aptrepo/dists/xenial/main/binary-amd64/Packages 403 Forbidden
E: Some index files failed to download. They have been ignored, or old ones used instead.
I am getting that error too and I did your steps.
CMake Error at /home/arl/catkin_ws/devel/share/ddynamic_reconfigure/cmake/ddynamic_reconfigureConfig.cmake:113 (message): Project 'ddynamic_reconfigure' specifies '/home/arl/catkin_ws/src/realsense/ddynamic_reconfigure/include' as an include dir, which is not found. It does neither exist as an absolute directory nor in '/home/arl/catkin_ws/src/realsense/ddynamic_reconfigure//home/arl/catkin_ws/src/realsense/ddynamic_reconfigure/include'. Report the problem to the maintainer 'Noam Dori <theNODO55@gmail.com>' and request to fix the problem. Call Stack (most recent call first): /opt/ros/kinetic/share/catkin/cmake/catkinConfig.cmake:76 (find_package) realsense/realsense2_camera/CMakeLists.txt:8 (find_package)
The message you posted states "Report the problem to the maintainer 'Noam Dori theNODO55@gmail.com".
It seems that you have cloned ddynamic_reconfigure from a wrong source. If you indeed in a need to build that package yourself and not use apt-get install, try cloning the package from here
Hi @dorodnic ,
I followed your steps by installing ddynamic_reconfigure package, and checking out tag 2.2.6, and run into the same error as ARLVOL. If it is installed from a wrong source, means that the default source is wrong. Can this be fixed? thanks!
Yes,I cloned it by myself and not by apt-get and it is work.
It will be better to update it from the apt and not clone it every time.
tnx
I am also running ROS melodic on ubuntu 18.04.2, tried to build the ROS node source 2.2.6, ran into the same issue (ddynamic_reconfigure was missing from catkin_ws/src), cloned it from https://github.com/pal-robotics/ddynamic_reconfigure, and everything build smoothly then. Thanks for the help here.
Hi @dorodnic ,
I followed your steps by installing ddynamic_reconfigure package, and checking out tag 2.2.6, and run into the same error as ARLVOL. If it is installed from a wrong source, means that the default source is wrong. Can this be fixed? thanks!
What do you mean by "default source"? The realsense2_camera does not state a source for ddynamic_reconfigure.
You can also try deleting the build folder in your catkin_ws then re-running catkin_make. This worked for me
I have the same issue and do not know how to solve ...
@doronhi
Hi, if you see realsense-ros/realsense2_camera/CMakeLists.txt it shows "ddynamic_reconfigure" is required now in line 18. Should I simply remove that requirement, since you said reansense does not rely on it long time ago?
@PhilippeRerole
Hi, did you do any extra operation after cloned and installed ddynamic_reconfigure from gihub?
I have cloned source, compiled then installed, but the same error pops again.
Thanks guys!
Sorry for misleading anyone. I didn't mean that "ddynamic_reconfigure" is not needed. Simply that it is not built by realsense2_camera and that the source code for that package is not included or pointed to by realsense2_camera.
The package "ddynamyic_reconfigure" is needed for building and running realsense2_camera.
Still need any further clarification for this topic? If not, will close this.
I'm getting the same error on ubuntu 18.04, so the package is not available yet, right?
The package is available for ubuntu 18.04. type:
sudo apt-get install ros-melodic-ddynamic-reconfigure
is it avaialable for windows?
The lack of this package up-to-date source breaks all ros1 installs done from source. Hence, the issue at hand should be open. While one can compile using the source here. The package has not been updated or known to work since ros kinetic.
This renders Realsense's useless in real world robotic scenarios. For example, using the Jetson Nano for inference with Realsense. That is, the Nano official image has Ubuntu 18.04 and running native ros1 with python3 requires installation from source. Other hacks are possible (like docker, upgrading manually) none of which will work with realsense (at least not with 435i or 455).
Hi @dnovischi ddynamic_reconfigure can be manually installed using sudo apt install with specific versions for Kinetic, Melodic and Noetic. This instruction is used instead of cloning the source.
Kinetic
sudo apt install ros-kinetic-ddynamic-reconfigure
Melodic
sudo apt install ros-melodic-ddynamic-reconfigure
Noetic
sudo apt install ros-noetic-ddynamic-reconfigure
Hi @MartyG-RealSense, I don't understand how having some packages solves the issue.
The setup is the following:
- Jetson Nano with Official Ubuntu 18.04 installed:
$ cat /etc/os-release
NAME="Ubuntu"
VERSION="18.04.6 LTS (Bionic Beaver)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 18.04.6 LTS"
VERSION_ID="18.04"
HOME_URL="https://www.ubuntu.com/"
SUPPORT_URL="https://help.ubuntu.com/"
BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/"
PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy"
VERSION_CODENAME=bionic
UBUNTU_CODENAME=bionic- Ros Noetic (full desktop) compiled and installed from source using official instructions here. The installation was checked and is working flawlessly (with default python3.6) on Ubuntu 18.04 official Jetson Nano image:
$ roscore
... logging to /home/jetson/.ros/log/56d5b7c4-8844-11ed-873c-ae8a2019ff15/roslaunch-jetson-antrobot3.local-26833.log
Checking log directory for disk usage. This may take a while.
Press Ctrl-C to interrupt
Done checking log file disk usage. Usage is <1GB.
started roslaunch server http://jetson-antrobot3.local:38921/
ros_comm version 1.15.15
SUMMARY
========
PARAMETERS
* /rosdistro: noetic
* /rosversion: 1.15.15
NODES
auto-starting new master
process[master]: started with pid [26843]
ROS_MASTER_URI=http://jetson-antrobot3.local:11311/
setting /run_id to 56d5b7c4-8844-11ed-873c-ae8a2019ff15
process[rosout-1]: started with pid [26856]
started core service [/rosout]
^C[rosout-1] killing on exit
[master] killing on exit
shutting down processing monitor...
... shutting down processing monitor complete-
Librealsense 2.50.0 compiled from source using official instructions here. And udev rules checked to see if they were installed properly.
-
Install compatible Realsense 435i firmware version 5.13.0.50 as specified officially here. Firmware checked with (x86 PC) realsense-viewer and ros noetic instalation via rviz, rqt and command line and is working properly.
-
Cloned the realsense-ros repo and checkout ros1-legacy with compatible tag version 2.3.2. Installed the only version of ddynamic_reconfigure installable possible on ubuntu18.04 :
sudo apt install ros-melodic-ddynamic-reconfigure(for which, I'm sorry, but I fail to see the relevance of since we're talking about ros-noetic installation through source). -
Tried to compile the realsense-ros using the official steps here which of course give:
$ catkin_make clean
Base path: /home/jetson/catkin_ws
Source space: /home/jetson/catkin_ws/src
Build space: /home/jetson/catkin_ws/build
Devel space: /home/jetson/catkin_ws/devel
Install space: /home/jetson/catkin_ws/install
####
#### Running command: "cmake /home/jetson/catkin_ws/src -DCATKIN_DEVEL_PREFIX=/home/jetson/catkin_ws/devel -DCMAKE_INSTALL_PREFIX=/home/jetson/catkin_ws/install -G Unix Makefiles" in "/home/jetson/catkin_ws/build"
####
-- The C compiler identification is GNU 8.4.0
-- The CXX compiler identification is GNU 8.4.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Using CATKIN_DEVEL_PREFIX: /home/jetson/catkin_ws/devel
-- Using CMAKE_PREFIX_PATH: /opt/ros/noetic
-- This workspace overlays: /opt/ros/noetic
-- Found PythonInterp: /usr/bin/python3 (found suitable version "3.6.9", minimum required is "3")
-- Using PYTHON_EXECUTABLE: /usr/bin/python3
-- Using Debian Python package layout
-- Using empy: /usr/bin/empy
-- Using CATKIN_ENABLE_TESTING: ON
-- Call enable_testing()
-- Using CATKIN_TEST_RESULTS_DIR: /home/jetson/catkin_ws/build/test_results
-- Found gtest sources under '/usr/src/googletest': gtests will be built
-- Found gmock sources under '/usr/src/googletest': gmock will be built
-- Found PythonInterp: /usr/bin/python3 (found version "3.6.9")
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - not found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE
-- Using Python nosetests: /usr/bin/nosetests3
-- catkin 0.8.10
-- BUILD_SHARED_LIBS is on
-- BUILD_SHARED_LIBS is on
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- ~~ traversing 2 packages in topological order:
-- ~~ - realsense2_description
-- ~~ - realsense2_camera
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- +++ processing catkin package: 'realsense2_description'
-- ==> add_subdirectory(realsense-ros/realsense2_description)
-- +++ processing catkin package: 'realsense2_camera'
-- ==> add_subdirectory(realsense-ros/realsense2_camera)
-- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy
-- Could NOT find ddynamic_reconfigure (missing: ddynamic_reconfigure_DIR)
-- Could not find the required component 'ddynamic_reconfigure'. The following CMake error indicates that you either need to install the package with the same name or change your environment so that it can be found.
CMake Error at /opt/ros/noetic/share/catkin/cmake/catkinConfig.cmake:83 (find_package):
Could not find a package configuration file provided by
"ddynamic_reconfigure" with any of the following names:
ddynamic_reconfigureConfig.cmake
ddynamic_reconfigure-config.cmake
Add the installation prefix of "ddynamic_reconfigure" to CMAKE_PREFIX_PATH
or set "ddynamic_reconfigure_DIR" to a directory containing one of the
above files. If "ddynamic_reconfigure" provides a separate development
package or SDK, be sure it has been installed.
Call Stack (most recent call first):
realsense-ros/realsense2_camera/CMakeLists.txt:11 (find_package)
-- Configuring incomplete, errors occurred!
See also "/home/jetson/catkin_ws/build/CMakeFiles/CMakeOutput.log".
See also "/home/jetson/catkin_ws/build/CMakeFiles/CMakeError.log".
Invoking "cmake" failedNow as per my previous post, I have already tried to use the source available here suggested in the official compilation steps. The compilation succeeds but nothing works.
I have also tried to install the ros-noetic ddynamic-reconfigure package: sudo apt install ros-noetic-ddynamic-reconfigure which, of course, is not installable on ubuntu 18.04:
sudo apt install ros-noetic-ddynamic-reconfigure
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
ros-noetic-ddynamic-reconfigure : Depends: libgcc-s1 (>= 3.0) but it is not installable
Depends: libstdc++6 (>= 9) but 8.4.0-1ubuntu1~18.04 is to be installed
Depends: ros-noetic-dynamic-reconfigure but it is not going to be installed
Depends: ros-noetic-roscpp but it is not going to be installed
E: Unable to correct problems, you have held broken packages.So, @MartyG-RealSense what am I missing? What is the solution for installations from source?
In the RealSense ROS1 wrapper, ddynamic_reconfigure is a required component. It allows changes to settings to be made dynamically during runtime after launch instead of in a launch file or roslaunch instruction before launch. It is not required in the ROS2 wrapper.
ddynamic_reconfigure can be installed by cloning its source as the wrapper installation instructions suggest. Whilst it is certainly valid to install it this way, I personally always recommend installing it from packages instead by using the apt-install packages for particular ROS1 branches that I listed above. The reason for this recommendation is simply because it is an easy installation method.
Checking carefully through your detailed description of your complete installation procedure on Jetson, I cannot see anything that is obviously incorrect and you have installed the various components in the appropriate order (librealsense, ROS, ddynamic_reconfigure, RealSense ROS1 wrapper). Your librealsense / Python installation is also working correctly.
There are occasionally problems with the ROS1 wrapper that are not correctable no matter what is tried, but are suddenly resolved if the entire catkin_ws/src catkin workspace folder is deleted and the wrapper is built from source again by following the instructions from the beginning after the catkin_ws/src folder is recreated. Choose to either install ddynamic_reconfigure from source or packages but do not use both methods.
In the RealSense ROS1 wrapper, ddynamic_reconfigure is a required component. It allows changes to settings to be made dynamically during runtime after launch instead of in a launch file or roslaunch instruction before launch. It is not required in the ROS2 wrapper.
So the best bet when using Jetson Nano is to do a distribution upgrade to ubuntu 20.04 and switch to ROS2?
Does the same apply to Jetson Xavier NX?
There are occasionally problems with the ROS1 wrapper that are not correctable no matter what is tried, but are suddenly resolved if the entire catkin_ws/src catkin workspace folder is deleted and the wrapper is built from source again by following the instructions from the beginning after the catkin_ws/src folder is recreated. Choose to either install ddynamic_reconfigure from source or packages but do not use both methods.
I'll give it a try. Also can you post your way of re-configuring udev rules?
On the other hand, what's your recommended way of using Realsense (435i and/or 455) with Jetson Nano based on a python3.x version? (I really don't care about the OS, as long as I can run ROS on python3. Our code requires tensorrt compiled models to run inside of ros nodes).
Thanks and Happy New Year!
PS: I'll post findings for this in more appropriate issue, as continuing the discussion here is kind of out of scope. (Probably in #2580)
You are very welcome!
A RealSense user provides a complete guide at #2197 (comment) for using Python 3 with Jetson Nano and RealSense D455.
The guide at the link below may also be worth reading, although it is not specific to RealSense or Jetson.
https://idorobotics.com/2020/08/19/setting-up-ros-with-python-3-and-opencv/