UnoJoyProcessingVisualizer
Opened this issue · 6 comments
GoogleCodeExporter commented
What steps will reproduce the problem?
1.Load UnoJoyArduinoSample code into UNO R3
2.Open UnoJoyProcessingVisualizer.exe
3.Window open,but only with gray screen, and it is stuck there
What is the expected output? What do you see instead?
Window open,but only with gray screen, and it is stuck there
What version of the product are you using? On what operating system?
Win XP SP3
UnoJoyWin-21Feb2013
Please provide any additional information below.
Loaded drivers, but just can't get it to work, Updated Java
Original issue reported on code.google.com by zs6...@gmail.com
on 9 Apr 2014 at 1:46
GoogleCodeExporter commented
In the TaskManager the UnoJoyProcessingVisualizer is running. Downloaded the
UnoJoyWin-21Feb2013 again just to make sure it not just a bad file.
Still sitting with a gray window with the UnoJoyProcessingVisualizer name at
the top. But no controller pic like in one of the clips on youtube.
Original comment by zs6...@gmail.com
on 9 Apr 2014 at 2:21
GoogleCodeExporter commented
I have also now downloaded and tested all older versions of the programs. All
UnoJoyProcessingVisualizer have the same problem.
Hope all this will help.
Original comment by zs6...@gmail.com
on 9 Apr 2014 at 2:32
GoogleCodeExporter commented
Hello. I'm running this under Win 7 64 but I'm no expert by any means.
Did you have problems installing the driver using the .bat file? Did you
change the amd64 references to x86 in the batch file(s)? (assuming you're on
an Intel chip)
Even without the Arduino plugged in, I can see the virtual controller on the
visualizer screen.
Original comment by MikeB1...@gmail.com
on 14 Apr 2014 at 9:58
GoogleCodeExporter commented
Im getting the same thing, Win 7 64bit with a redboard arduino. What arduino
are you using?
Original comment by jacob.bo...@gmail.com
on 8 Jul 2014 at 5:53
GoogleCodeExporter commented
I got the same thing on windows 8.1 64bit, but i found a way to make it work
1: download and install processing from
https://www.processing.org/download/?processing
2: run UnoJoyProcessingVisualizer NOT the application but the processing source
(it 15KB)
3: when processing opens click "run" in the top left
4: it should open after a few seconds, enjoy :)
Original comment by ubuntusu...@gmail.com
on 4 Aug 2014 at 7:48
GoogleCodeExporter commented
This last solution worked for me, thank you!
Original comment by toni.tel...@gmail.com
on 2 Mar 2015 at 5:58