http://kapacitor_con:9092 doesn't resolve
mdbarrett99 opened this issue · 4 comments
mdbarrett99 commented
Hi,
I have a brand new opennti installation and I've traced JTI coming into the the linux host and then passing through to the container arrangement. Looking at /var/log/influxdb.log I see these messages which roughly line up with JTI streaming coming from my MX.
[httpd] 172.17.0.3 - juniper [19/Oct/2018:15:06:47 +1100] "POST /write?db=juniper&p=%5BREDACTED%5D&precision=ms&u=juniper HTTP/1.1" 204 0 "-" "Ruby" 663096d6-d354-11e8-82dc-000000000000 6586
ts=2018-10-19T04:06:48.005985Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=juniper&precision=ns&rp=four_weeks: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
[httpd] 172.17.0.3 - juniper [19/Oct/2018:15:06:49 +1100] "POST /write?db=juniper&p=%5BREDACTED%5D&precision=ms&u=juniper HTTP/1.1" 204 0 "-" "Ruby" 6761e47a-d354-11e8-82dd-000000000000 6632
ts=2018-10-19T04:06:50.007185Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=_internal&precision=ns&rp=monitor: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
ts=2018-10-19T04:06:50.007229Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=juniper&precision=ns&rp=four_weeks: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
Given this I'm assuming this is why I don't see anything in my graphs from grafana etc.
Thanks.
Cheers.
M
agould123 commented
Is kapacitor used in the graphing process ?
How are you sending your telemetry data from your MX ? Native or openconfig style ?
From my MX960, I’m sending native udp port 50000 to opennti’s fluentd then graphing using Chronograf port 8888
—- Aaron
… On Oct 18, 2018, at 11:08 PM, mdbarrett99 ***@***.***> wrote:
Hi,
I have a brand new opennti installation and I've traced JTI coming into the the linux host and then passing through to the container arrangement. Looking at /var/log/influxdb.log I see these messages which roughly line up with JTI streaming coming from my MX.
[httpd] 172.17.0.3 - juniper [19/Oct/2018:15:06:47 +1100] "POST /write?db=juniper&p=%5BREDACTED%5D&precision=ms&u=juniper HTTP/1.1" 204 0 "-" "Ruby" 663096d6-d354-11e8-82dc-000000000000 6586
ts=2018-10-19T04:06:48.005985Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=juniper&precision=ns&rp=four_weeks: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
[httpd] 172.17.0.3 - juniper [19/Oct/2018:15:06:49 +1100] "POST /write?db=juniper&p=%5BREDACTED%5D&precision=ms&u=juniper HTTP/1.1" 204 0 "-" "Ruby" 6761e47a-d354-11e8-82dd-000000000000 6632
ts=2018-10-19T04:06:50.007185Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=_internal&precision=ns&rp=monitor: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
ts=2018-10-19T04:06:50.007229Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=juniper&precision=ns&rp=four_weeks: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
Given this I'm assuming this is why I don't see anything in my graphs from grafana etc.
Thanks.
Cheers.
M
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or mute the thread.
3fr61n commented
Hi
Kapacitor is not used so far, is into the default deployment in the case if anyone wnats to use it
Regarss
…Sent from my iPhone
On 19 Oct 2018, at 16:44, Aaron Gould ***@***.***> wrote:
Is kapacitor used in the graphing process ?
How are you sending your telemetry data from your MX ? Native or openconfig style ?
From my MX960, I’m sending native udp port 50000 to opennti’s fluentd then graphing using Chronograf port 8888
Aaron
> On Oct 18, 2018, at 11:08 PM, mdbarrett99 ***@***.***> wrote:
>
> Hi,
>
> I have a brand new opennti installation and I've traced JTI coming into the the linux host and then passing through to the container arrangement. Looking at /var/log/influxdb.log I see these messages which roughly line up with JTI streaming coming from my MX.
>
> [httpd] 172.17.0.3 - juniper [19/Oct/2018:15:06:47 +1100] "POST /write?db=juniper&p=%5BREDACTED%5D&precision=ms&u=juniper HTTP/1.1" 204 0 "-" "Ruby" 663096d6-d354-11e8-82dc-000000000000 6586
> ts=2018-10-19T04:06:48.005985Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=juniper&precision=ns&rp=four_weeks: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
> [httpd] 172.17.0.3 - juniper [19/Oct/2018:15:06:49 +1100] "POST /write?db=juniper&p=%5BREDACTED%5D&precision=ms&u=juniper HTTP/1.1" 204 0 "-" "Ruby" 6761e47a-d354-11e8-82dd-000000000000 6632
> ts=2018-10-19T04:06:50.007185Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=_internal&precision=ns&rp=monitor: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
> ts=2018-10-19T04:06:50.007229Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=juniper&precision=ns&rp=four_weeks: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
>
> Given this I'm assuming this is why I don't see anything in my graphs from grafana etc.
>
> Thanks.
>
> Cheers.
>
> M
>
> —
> You are receiving this because you are subscribed to this thread.
> Reply to this email directly, view it on GitHub, or mute the thread.
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or mute the thread.
agould123 commented
Thanks Efrain, what exactly is kapacitor’s purpose in the OpenNTI suite? What is it used for?
I’m wondering if kapacitor is for alerting at least. The reason I say that is because I tried to set up my first alert yesterday in chronograf and it showed me that kapacitor needed to be enabled and I get an error when I try to enable kapacitor in the chronograf GUI
Maybe you can instruct me on what I need to do and what is it used for.
Aaron
… On Oct 19, 2018, at 11:14 AM, Efrain ***@***.***> wrote:
Hi
Kapacitor is not used so far, is into the default deployment in the case if anyone wnats to use it
Regarss
Sent from my iPhone
> On 19 Oct 2018, at 16:44, Aaron Gould ***@***.***> wrote:
>
> Is kapacitor used in the graphing process ?
>
> How are you sending your telemetry data from your MX ? Native or openconfig style ?
>
> From my MX960, I’m sending native udp port 50000 to opennti’s fluentd then graphing using Chronograf port 8888
>
> Aaron
>
> > On Oct 18, 2018, at 11:08 PM, mdbarrett99 ***@***.***> wrote:
> >
> > Hi,
> >
> > I have a brand new opennti installation and I've traced JTI coming into the the linux host and then passing through to the container arrangement. Looking at /var/log/influxdb.log I see these messages which roughly line up with JTI streaming coming from my MX.
> >
> > [httpd] 172.17.0.3 - juniper [19/Oct/2018:15:06:47 +1100] "POST /write?db=juniper&p=%5BREDACTED%5D&precision=ms&u=juniper HTTP/1.1" 204 0 "-" "Ruby" 663096d6-d354-11e8-82dc-000000000000 6586
> > ts=2018-10-19T04:06:48.005985Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=juniper&precision=ns&rp=four_weeks: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
> > [httpd] 172.17.0.3 - juniper [19/Oct/2018:15:06:49 +1100] "POST /write?db=juniper&p=%5BREDACTED%5D&precision=ms&u=juniper HTTP/1.1" 204 0 "-" "Ruby" 6761e47a-d354-11e8-82dd-000000000000 6632
> > ts=2018-10-19T04:06:50.007185Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=_internal&precision=ns&rp=monitor: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
> > ts=2018-10-19T04:06:50.007229Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=juniper&precision=ns&rp=four_weeks: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
> >
> > Given this I'm assuming this is why I don't see anything in my graphs from grafana etc.
> >
> > Thanks.
> >
> > Cheers.
> >
> > M
> >
> > —
> > You are receiving this because you are subscribed to this thread.
> > Reply to this email directly, view it on GitHub, or mute the thread.
> —
> You are receiving this because you are subscribed to this thread.
> Reply to this email directly, view it on GitHub, or mute the thread.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or mute the thread.
3fr61n commented
Exactly this is the idea to setup alarms based on thresholds, etc, you can check the kapacitor web site for more details
…Sent from my iPhone
On 19 Oct 2018, at 19:15, Aaron Gould ***@***.***> wrote:
Thanks Efrain, what exactly is kapacitor’s purpose in the OpenNTI suite? What is it used for?
I’m wondering if kapacitor is for alerting at least. The reason I say that is because I tried to set up my first alert yesterday in chronograf and it showed me that kapacitor needed to be enabled and I get an error when I try to enable kapacitor in the chronograf GUI
Maybe you can instruct me on what I need to do and what is it used for.
Aaron
> On Oct 19, 2018, at 11:14 AM, Efrain ***@***.***> wrote:
>
> Hi
>
> Kapacitor is not used so far, is into the default deployment in the case if anyone wnats to use it
>
> Regarss
>
> Sent from my iPhone
>
> > On 19 Oct 2018, at 16:44, Aaron Gould ***@***.***> wrote:
> >
> > Is kapacitor used in the graphing process ?
> >
> > How are you sending your telemetry data from your MX ? Native or openconfig style ?
> >
> > From my MX960, I’m sending native udp port 50000 to opennti’s fluentd then graphing using Chronograf port 8888
> >
> > Aaron
> >
> > > On Oct 18, 2018, at 11:08 PM, mdbarrett99 ***@***.***> wrote:
> > >
> > > Hi,
> > >
> > > I have a brand new opennti installation and I've traced JTI coming into the the linux host and then passing through to the container arrangement. Looking at /var/log/influxdb.log I see these messages which roughly line up with JTI streaming coming from my MX.
> > >
> > > [httpd] 172.17.0.3 - juniper [19/Oct/2018:15:06:47 +1100] "POST /write?db=juniper&p=%5BREDACTED%5D&precision=ms&u=juniper HTTP/1.1" 204 0 "-" "Ruby" 663096d6-d354-11e8-82dc-000000000000 6586
> > > ts=2018-10-19T04:06:48.005985Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=juniper&precision=ns&rp=four_weeks: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
> > > [httpd] 172.17.0.3 - juniper [19/Oct/2018:15:06:49 +1100] "POST /write?db=juniper&p=%5BREDACTED%5D&precision=ms&u=juniper HTTP/1.1" 204 0 "-" "Ruby" 6761e47a-d354-11e8-82dd-000000000000 6632
> > > ts=2018-10-19T04:06:50.007185Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=_internal&precision=ns&rp=monitor: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
> > > ts=2018-10-19T04:06:50.007229Z lvl=info msg="Post http://kapacitor_con:9092/write?consistency=&db=juniper&precision=ns&rp=four_weeks: dial tcp: lookup kapacitor_con on 8.8.8.8:53: no such host" log_id=0BEbm3Il000 service=subscriber
> > >
> > > Given this I'm assuming this is why I don't see anything in my graphs from grafana etc.
> > >
> > > Thanks.
> > >
> > > Cheers.
> > >
> > > M
> > >
> > > —
> > > You are receiving this because you are subscribed to this thread.
> > > Reply to this email directly, view it on GitHub, or mute the thread.
> > —
> > You are receiving this because you are subscribed to this thread.
> > Reply to this email directly, view it on GitHub, or mute the thread.
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub, or mute the thread.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or mute the thread.