KaufHA/PLF12

PLF12 & Tasmota 13.1.0 showing high voltage

Opened this issue · 1 comments

DP-M commented

Recently purchased PLF12, flashed to latest Kauf firmware, before flashing to latest tasmota.bin.gz. Applied the following template listed on this github project: {"NAME":"Kauf Plug","GPIO":[0,320,0,32,2720,2656,0,0,321,224,2624,0,0,0],"FLAG":0,"BASE":18}

Tasmota is showing me 151v, while Kauf firmware shows me 115v (which is accurate based on other smart plugs).

Thanks!

Wraith324 commented

@DP-M you have to perform a calibration procedure. Just follow these instructions:
https://tasmota.github.io/docs/Power-Monitoring-Calibration/

I'm loving these plugs. I used stock firmware for awhile, but decided that I wanted a password on these to prevent tampering, so I started flashing them to Tasmota. They work great. I will probably buy more.

  • 👍1