Kirosha-Team/Listener

C++ library for communication between smart devices and gestures' controllable smart station.

Caution

this project is discontinued due to bugs and poor optimization.

Getting started

Hardware requirements

Note

The library requires board with ESP8266 chip.

ESP8266 Board

Software requirements

Arduino IDE

Installation

Tip

We recommend downloading the latest release to avoid bugs.

Add library to the sketch:

Sketch -> Include library -> Add .ZIP library... -> select/downloaded/library

Usage

Caution

Don't try to initialize library twice, otherwise an error will occur.

First, the Listener class is created. After that, we use the begin method to connect our smart device to gestures' controllable smart station. The get method is used to receive data, and the send method is used to send data.

// imports Listener library
#include <Listener.h>

char *server_ip = ""; // your gestures' controllable smart station ip address
int server_port = 8888; // your gestures' controllable smart station port (default is 8888)

int client_port = 9999; // your device port (default is 9999)

const char *ssid = ""; // your Wi-Fi ssid (name)
const char *password = ""; // your Wi-Fi password

char *device_data = ""; // your device data

// initializes Listener library
Listener listener(server_ip, server_port, client_port, ssid, password);

void setup() {
  // connects to your gestures' controllable smart station
  listener.begin(device_data);
}

void loop() {
  // gets data from your gestures' controllable smart station
  char *received_data = listener.get();

  if (received_data == "your message here") {
    // sends data to your gestures' controllable smart station
    listener.send("your message here");
  }

  // delay for 0.1 second
  delay(100);
}

Contribution

Pull requests are welcome. For major changes, please open an issue first to discuss what you would like to change.