ZHA: Frient devices not found
c11umw opened this issue · 1 comments
Hi
Today I migrated over from a ConbeeII to Sonoff 3.0 Dongle Plus-P
ZNP = Texas Instruments Z-Stack ZNP protocol: CC253x, CC26x2, CC13x2 by ZHA
Before doing so I updated the firmware of the Sonoff with CC1352P2_CC2652P_launchpad_coordinator_20221226
Flashing tool: Texas Instruments: Flash Programmer 2
Once done the migration went well and I re-paired all my devices with the exception of our Frient ones.
2 Smart Energy plugs (SPLZB-134)
1 Smart Electricity Meter (ZHEMI101)
They worked for a long time with the ConbeeII, but I'm unable to get them to pair with the Sonoff coordinator
RaspberryPi 4 install (SSD)
Home Assistant 2023.3.6
Supervisor 2023.03.2
Operating System 9.5
Frontend 20230309.1 - latest
USB extension used to move the dongle far from the SSD/Pi
Dongle HW info from HomeAssistant:
/dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0
DEVLINKS: >-
/dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0
/dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.4:1.0-port0
DEVNAME: /dev/ttyUSB0
DEVPATH: >-
/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/ttyUSB0/tty/ttyUSB0
ID_BUS: usb
ID_MODEL: Sonoff_Zigbee_3.0_USB_Dongle_Plus
ID_MODEL_ENC: Sonoff\x20Zigbee\x203.0\x20USB\x20Dongle\x20Plus
ID_MODEL_ID: ea60
ID_PATH: platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.4:1.0
ID_PATH_TAG: platform-fd500000_pcie-pci-0000_01_00_0-usb-0_1_4_1_0
ID_REVISION: '0100'
ID_SERIAL: Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001
ID_SERIAL_SHORT: '0001'
ID_TYPE: generic
ID_USB_DRIVER: cp210x
ID_USB_INTERFACES: ':ff0000:'
ID_USB_INTERFACE_NUM: '00'
ID_VENDOR: Silicon_Labs
ID_VENDOR_ENC: Silicon\x20Labs
ID_VENDOR_ID: 10c4
MAJOR: '188'
MINOR: '0'
SUBSYSTEM: tty
TAGS: ':systemd:'
USEC_INITIALIZED: '5497042'
Resolved. You have to hold the pairing button on the devices for a really long time.
After 5-6s it flashes.. ignore that and keep holding.
10-12s and it double flashes... ignore that too.
After about 20s it goes solid red.
Release the pairing button and off it goes