Unexpected "Permit Join" Activation on CC2652P4 Coordinator
Morteza-24 opened this issue · 1 comments
Issue Description:
I am using a CC2652P4 as my coordinator, and I've observed an unexpected behavior where the "Permit Join" LED turns on without user initiation. When this event occurs, new devices can join the network even though the "Permit Join" button is turned off in the Zigbee2Mqtt front-end (but the LED on the module is turned on).
Steps to Reproduce:
- Program a CC2652 with the @ptvoinfo uart firmware.
- Turn it on near the coordinator.
Expected Behavior:
The "Permit Join" LED should only activate when explicitly initiated by the user. The Zigbee2Mqtt server should accurately reflect the status of the "Permit Join" button in the front-end and communicate relevant events to the MQTT server.
Additional Information:
- Zigbee2Mqtt server is not aware of the unexpected "Permit Join" activations.
- The issue was initially associated with new @ptvoinfo devices but has since started occurring randomly.
- My is CC2652 module is from the RF-star company. (RF-BM-2652P4)
Thank you for your attention and assistance.
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days