5.12 kernel has issue
Closed this issue · 2 comments
https://github.com/Linaro/linux-kernel-uadk/tree/uacce-devel-5.12
make defconfig
make -j4
linaro@ubuntu:$ zip_sva_perf$ NotifiedOS]:[37L]
Couldn't open file /sys/kernel/debug/tracing/events/iommu/dev_fault/id
IOPF statistic unavailable
NOTICE: RasIntBase = 0x140090000,ErrMapping = 0x29
NOTICE: [RasEriInterrupt]:[141L]NodeTYP0Status = 0x0
NOTICE: [RasEriInterrupt]:[157L]NodeTYP1Status = 0x1
NOTICE: [NimbusZipNodeType1]:[2593L]This is zip, Basbad status(ctx_st=0x0, s=0x41, t=3)
Compress bz=512000 nb=1×10, speed=184.3 MB/s (±0.0% N=1) overall=161.7 MB/s (±0.0%)
e = 0x141000000
NOTICE: [NimbusZipHandle]:[2542L]QM_PF_ABNORMAL_INT_SOURCE = 0x0
NOTICE: [NimbusZipHandle]:[2543L]ZIP_CORE_INT_SOURCE = 0xc
NOTICE: [PrintSecurityType]:[389L] SecurityType is RECOVERABLE!
NOTICE: [RasErrorDataPcieOemProcessor]:[1748L]BDF[0x75:0x0:0x0]
NOTICE: [HestGhesV2SetGenericErrorData]:[188L] Fill in HEST TABLE ,AckRegister=44010000
NOTICE: [Hestlinaro@ubuntu:
NOTICE: [RasEriInterrupt]:[173L]NodeTYP2Status = 0x0
[ 849.220545] {7}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
[ 849.228776] {7}[Hardware Error]: event severity: recoverable
[ 849.234409] {7}[Hardware Error]: Error 0, type: recoverable
[ 849.240043] {7}[Hardware Error]: section_type: PCIe error
[ 849.245589] {7}[Hardware Error]: version: 4.0
[ 849.250097] {7}[Hardware Error]: command: 0x0006, status: 0x0010
[ 849.256248] {7}[Hardware Error]: device_id: 0000:75:00.0
[ 849.261707] {7}[Hardware Error]: slot: 0
[ 849.265784] {7}[Hardware Error]: secondary_bus: 0x00
[ 849.270897] {7}[Hardware Error]: vendor_id: 0x19e5, device_id: 0xa250
[ 849.277479] {7}[Hardware Error]: class_code: 120000
linaro@ubuntu:~$ test_hisi_sec
this is a hisi sec test.
Test sec Cipher parameter default, alg:ecb(aes), set_times:10,set_pktlen:16 bytes, set_keylen:128 bit.
hisi sec init Kunpeng920!
req src--------->:
\0x00\0x11\0x22\0x33\0x44\0x55\0x66\0x77
\0x88\0x99\0xaa\0xbb\0xcc\0xdd\0xee\0xff
cipher req key--------->:
SEC BD cipher fail! done=0x1, etype=0xd
SEC BD cipher fail! done=0x1, etype=0xd
SEC BD cipher fail! done=0x1, etype=0xd
SEC BD cipher fail! done=0x1, etype=0xd
SEC BD cipher fail! done=0x1, etype=0xd
SEC BD cipher fail! done=0x1, etype=0xd
SEC BD cipher fail! done=0x1, etype=0xd
SEC BD cipher fail! done=0x1, etype=0xd
SEC BD cipher fail! done=0x1, etype=0xd
SEC BD cipher fail! done=0x1, etype=0xd
time_used:275 us, send task num:10
Pro-5277, thread_id-5277, speed:36363.637 ops, Perf: 568 KB/s
Test cipher sync function: output dst-->
\0x00\0x00\0x00\0x00\0x00\0x00\0x00\0x00
\0x00\0x00\0x00\0x00\0x00\0x00\0x00\0x00
linaro@ubuntu:~$ test_hisi_hpre
test start run rsa-gen :
key_bits = 1024
trd_mode = sync
trd_num = 2
core_mask = [0x0][0x0]
msg_type = 0
msg_len = 0xffffffff
id_len = 0xffffffff
hash_type = 1
rand_type = 1
rand_len = 0xffffffff
data_from = 0
perf_test = 0
check = 0
cycles = 100
seconds = 0
HPRE do rsa fail!done=0x2, etype=0x4
Proc-5278, T-5279:hpre rsa-gen 0th status=0 fail!
HPRE do rsa fail!done=0x2, etype=0x4
Proc-5278, T-5280:hpre rsa-gen 0th status=0 fail!
<< test finish!
NOTICE: RasIntBase = 0x2010a0000,ErrMapping = 0x29
NOTICE: [RasEriInterrupt]:[141L]NodeTYP0Status = 0x0
NOTICE: [RasEriInterrupt]:[157L]NodeTYP1Status = 0x2
NOTICE: [NimbusHpreNodeType1]:[2405L]This is hpre, Base = 0x208000000
NOTICE: [NimbusHpreHandle]:[2348L] HpreHacIntSt = 0xe408
NOTICE: [NimbusHpreHandle]:[2349L] HpreQmIntStatus = 0x0
NOTICE: [PrintSecurityType]:[389L] SecurityType is RECOVERABLE!
NOTICE: [RasElinaro@ubuntu:~$ rrorDataPcieOemProcessor]:[1748L]BDF[0x79:0x0:0x0]
NOTICE: [HestGhesV2SetGenericErrorData]:[188L] Fill in HEST TABLE ,AckRegister=44010000
NOTICE: [HestNotifiedOS]:[37L]
NOTICE: [RasEriInterrupt]:[173L]NodeTYP2Status = 0x0
[ 1090.772613] {8}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
[ 1090.780842] {8}[Hardware Error]: event severity: recoverable
[ 1090.786474] {8}[Hardware Error]: Error 0, type: recoverable
[ 1090.792107] {8}[Hardware Error]: section_type: PCIe error
[ 1090.797653] {8}[Hardware Error]: version: 4.0
[ 1090.802161] {8}[Hardware Error]: command: 0x0006, status: 0x0010
[ 1090.808311] {8}[Hardware Error]: device_id: 0000:79:00.0
[ 1090.813771] {8}[Hardware Error]: slot: 0
[ 1090.817848] {8}[Hardware Error]: secondary_bus: 0x00
[ 1090.822961] {8}[Hardware Error]: vendor_id: 0x19e5, device_id: 0xa258
[ 1090.829543] {8}[Hardware Error]: class_code: 100000
It is crypto issue.
Sync 5.11 drivers/crypto/hisilicon/ to 5.12, the issues disappears.
Still in check
It is because sva is not enable by default,
Enable sva as default on uacce-devel-5.12
Linaro/linux-kernel-uadk@09ac0e5