With Dexcom G7 - End of the tolerance time does not fit
Opened this issue · 5 comments
In the CGM screen, the - end of the tolerance time with the Dexcom G7 is displayed incorrectly. Here, the sensor expiration time is equal to the end of the tolerance time. However, the end of the tolerance time must be +12h to the sensor expiration time.
Loop: Dev. 3.5.0
The first says AM, the second says PM. Mine says the same. The PM is 12 hours after AM. If your phone was on 24 hours time, this would show as 08:20 and 20:20.
Please review again and close this Issue if you agree with me that there is no error.
Ah okay, now I've also seen it AM and PM. But my phone is set to 24 hours (see screenshot). Otherwise it was always displayed in 24h format, I would say.
I’m on Loop 3.4.1. I switched my phone to 24 hour time display. Quit and restarted Loop to update display. Mine shows 24 hour version. The G7SensorKit submodule used for dev and 3.4.1 is the same.
Strange - I can't reproduce this. I changed my phone time to 24-hour, and my phone language to German (just in case there was something about that specific localization), and I see the 24-hour time as expected, not the AM/PM in the original screenshot.
Strangely, under Last Reading (screenshot) the 24h format is used, but otherwise the 12h format.