Low decoded audio volume in rev 0.1e
Closed this issue · 5 comments
sp5wwp commented
After changing the value of the volume potentiometer from 50k to 10k, the signal at the audio amplifier's input decreased in amplitude.
Workaround: solder a 2k resistor across R31 (22k) to increase amplifier's gain.
sp5wwp commented
Fixed.
hofmand commented
Workaround: solder a 2k resistor across R31 (22k) to increase amplifier's gain.
Could we get instructions for this workaround? The board I just received from Lilygo has low audio output and I don't even know where to find R31.
sp5wwp commented
I believe it's this one, should have 223 written on it.
hofmand commented
Thanks, the one on my board has "182" which seems correct.