Add some more clearance around mounting holes

Question

Add some more clearance around mounting holes

Closed this issue 6 months ago · 2 comments

dd5xl commented a year ago

Clearance around 3 of 4 mounting holes is not sufficient to add washers or to use a wrench to tighten the nuts.

In case of a PCB redesign please consider to add some more clearance.

Answer 1 · 2024-06-09T08:09:38.000Z

1.0 is a complete redesign, so it should be OK then :)

Answer 2 · 2024-07-28T19:02:43.000Z

Revision 1.0 has at least 1.8mm of clearance between the edge of the hole and the closest component. This clearance can be increased if opting for digital potentiometers instead of the multiturn potentiometers. Revision1.0 is also designed with a specific enclosure in mind.