"adjustAmpLevelInWatts" verursacht Absturz des Adapters
keksn opened this issue · 2 comments
Ich verwende diesen Datenpunkt schon seit fast einem Jahr in einem Blockly Programm für die Überschussladung. Seit kurzem verursacht dieses beschreiben des Datenpunkts den Absturz des Adapters. Das Programm wurde nicht verändert. Ich habe schon andere Versionen des Adapters und auch andere Firmware auf dem Go-eCharger probiert....ohne Erfolg.
2022-05-16 17:54:00.201 info 200 with message: OK
go-e.0
2022-05-16 17:54:00.087 warn Terminated (UNCAUGHT_EXCEPTION): Without reason
go-e.0
2022-05-16 17:54:00.086 info terminating
go-e.0
2022-05-16 17:54:00.075 error Cannot read property 'finish' of undefined
go-e.0
2022-05-16 17:54:00.075 error TypeError: Cannot read property 'finish' of undefined at GoE.adjustAmpLevelInWatts (/opt/iobroker/node_modules/iobroker.go-e/main.js:793:25)
go-e.0
2022-05-16 17:54:00.074 error unhandled promise rejection: Cannot read property 'finish' of undefined
go-e.0
2022-05-16 17:54:00.074 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
go-e.0
2022-05-16 17:54:00.071 debug set maxAmperes (amx) by adjustAmpLevelInWatts: 10 with 1023 watts
go-e.0
2022-05-16 17:54:00.066 info Set value 10 of id amx
go-e.0
2022-05-16 17:54:00.063 debug Current used 1392 Watts with 6 Ampere (sum) by 1Phases and adjusting this with 1023 watts by 232 Volts (avg) to new max of 10 Amperes per Phase
go-e.0
2022-05-16 17:53:35.848 debug {"version":"B","tme":"1605221753","rbc":"72","rbt":"272308637","car":"2","amx":"6","amp":"6","err":"0","ast":"0","alw":"1","stp":"0","cbl":"32","pha":"57","fsp":"1","tma":[43.125,46.125],"dws":"1549395","dwo":"180","adi":"1","uby":"0","eto":"52834","wst":"3","fwv":"053.3","nrg":[232,233,233,1,61,0,0,14,0,0,0,145,100,1,0,90],"sse":"050634","wss":"Home1","wke":"","wen":"1","cdi":"0","tof":"101","tds":"1","lbr":"255","aho":"0","afi":"6","azo":"0","ama":"16","al1":"6","al2":"10","al3":"12","al4":"14","al5":"16","cid":"255","cch":"65535","cfi":"65280","lse":"1","ust":"0","wak":"","r1x":"2","dto":"0","nmo":"0","sch":"AAAAAAAAAAAAAAAA","sdp":"0","eca":"0","ecr":"0","ecd":"0","ec4":"0","ec5":"0","ec6":"0","ec7":"0","ec8":"0","ec9":"0","ec1":"0","rca":"1","rcr":"","rcd":"","rc4":"","rc5":"","rc6":"","rc7":"","rc8":"","rc9":"","rc1":"","rna":"User 1","rnm":"User 2","rne":"User 3","rn4":"User 4","rn5":"User 5","rn6":"User 6","rn7":"User 7","rn8":"User 8","rn9":"User 9","rn1":"User 10","loe":0,"lot":32,"lom":6,"lop":50,"log":"","lof":0,"loa":0,"lch":271543}
go-e.0
2022-05-16 17:53:35.848 debug Response: 200 - OK with data as object
go-e.0
2022-05-16 17:53:35.617 debug Starte Abfrage an: http://192.168.1.117/status
go-e.0
2022-05-16 17:53:35.613 info Intervall: 60
go-e.0
2022-05-16 17:53:35.612 info Server: 192.168.1.117
go-e.0
2022-05-16 17:53:35.574 info starting. Version 1.0.22 (non-npm: MK-2001/ioBroker.go-e#22cca4245144c9bc2baf5594daa833765aa119ed) in /opt/iobroker/node_modules/iobroker.go-e, node: v14.19.2, js-controller: 4.0.23
go-e.0
2022-05-16 17:53:00.086 warn Terminated (UNCAUGHT_EXCEPTION): Without reason
go-e.0
2022-05-16 17:53:00.085 info terminating
go-e.0
2022-05-16 17:53:00.082 error Cannot read property 'finish' of undefined
go-e.0
2022-05-16 17:53:00.081 error TypeError: Cannot read property 'finish' of undefined at GoE.adjustAmpLevelInWatts (/opt/iobroker/node_modules/iobroker.go-e/main.js:793:25)
go-e.0
2022-05-16 17:53:00.081 error unhandled promise rejection: Cannot read property 'finish' of undefined
go-e.0
2022-05-16 17:53:00.080 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
go-e.0
2022-05-16 17:53:00.077 debug set maxAmperes (amx) by adjustAmpLevelInWatts: 6 amperes by -870 watts
go-e.0
2022-05-16 17:53:00.068 info Set value 6 of id amx
go-e.0
2022-05-16 17:53:00.064 debug Current used 1386 Watts with 6 Ampere (sum) by 1Phases and adjusting this with -870 watts by 231 Volts (avg) to new max of 2 Amperes per Phase
go-e.0
2022-05-16 17:52:34.915 debug {"version":"B","tme":"1605221752","rbc":"72","rbt":"272247708","car":"2","amx":"6","amp":"6","err":"0","ast":"0","alw":"1","stp":"0","cbl":"32","pha":"57","fsp":"1","tma":[43.25,46],"dws":"1540621","dwo":"180","adi":"1","uby":"0","eto":"52834","wst":"3","fwv":"053.3","nrg":[231,233,232,1,61,0,0,14,0,0,0,145,100,1,0,92],"sse":"050634","wss":"Home1","wke":"","wen":"1","cdi":"0","tof":"101","tds":"1","lbr":"255","aho":"0","afi":"6","azo":"0","ama":"16","al1":"6","al2":"10","al3":"12","al4":"14","al5":"16","cid":"255","cch":"65535","cfi":"65280","lse":"1","ust":"0","wak":"","r1x":"2","dto":"0","nmo":"0","sch":"AAAAAAAAAAAAAAAA","sdp":"0","eca":"0","ecr":"0","ecd":"0","ec4":"0","ec5":"0","ec6":"0","ec7":"0","ec8":"0","ec9":"0","ec1":"0","rca":"1","rcr":"","rcd":"","rc4":"","rc5":"","rc6":"","rc7":"","rc8":"","rc9":"","rc1":"","rna":"User 1","rnm":"User 2","rne":"User 3","rn4":"User 4","rn5":"User 5","rn6":"User 6","rn7":"User 7","rn8":"User 8","rn9":"User 9","rn1":"User 10","loe":0,"lot":32,"lom":6,"lop":50,"log":"","lof":0,"loa":0,"lch":271543}
go-e.0
2022-05-16 17:52:34.915 debug Response: 200 - OK with data as object
go-e.0
2022-05-16 17:52:34.830 debug Starte Abfrage an: http://192.168.1.117/status
go-e.0
2022-05-16 17:52:34.825 info Intervall: 60
go-e.0
2022-05-16 17:52:34.823 info Server: 192.168.1.117
go-e.0
2022-05-16 17:52:34.778 info starting. Version 1.0.22 (non-npm: MK-2001/ioBroker.go-e#22cca4245144c9bc2baf5594daa833765aa119ed) in /opt/iobroker/node_modules/iobroker.go-e, node: v14.19.2, js-controller: 4.0.23
go-e.0
2022-05-16 17:52:00.357 info 200 with message: OK
go-e.0
2022-05-16 17:52:00.082 warn Terminated (UNCAUGHT_EXCEPTION): Without reason
go-e.0
2022-05-16 17:52:00.081 info terminating