MaikStohn/UP3D

Issues

• getting error [ERROR] USB Open Device (4745:0001/2777/277D/277F) not found

  #55 opened a year ago by hansmortensen
  1

• How do I do load fillament using linux

  #53 opened 3 years ago by williamsokol
  1

• Set Temperature

  #54 opened 2 years ago by Bobbimus
  0

• Understanding the protocol

  #52 opened 3 years ago by IamTheCarl
  2

• Up! Box printing at a 3-5 degree angle.

  #31 opened 8 years ago by orthoa
  53

• UP!Mini stops after having printed some layers

  #26 opened 9 years ago by companje
  39

• My Mini starts to print without heating the nozzle!

  #47 opened 8 years ago by putzvarruckt
  10

• Work on New UpBox+ ?

  #44 opened 8 years ago by 3DWombat
  6

• Cetus ROM 6.14 support

  #50 opened 7 years ago by michael-betz
  12

• UP3DWifi

  #49 opened 7 years ago by yanivg101
  0

• UP CPU Chip

  #45 opened 8 years ago by upchip
  20

• UP! Mini 2 support

  #48 opened 7 years ago by akliouev
  0

• UP BOX - Nozzle height problem - Nozzle far from bed

  #46 opened 8 years ago by brenorbm
  4

• New updates

  #42 opened 8 years ago by kscheff
  7

• Calculation of a for extruder

  #37 opened 8 years ago by kscheff
  3

• UP3DTOOLS on mac

  #34 opened 8 years ago by peters5555
  4

• Cetus3D support

  #36 opened 8 years ago by kscheff
  4

• Partial infill shift with Simplify3D

  #39 opened 8 years ago by kscheff
  4

• plus - freezes after 28k

  #43 opened 8 years ago by arhi
  3

• Rework function (names, variables) now that Tiertime released some header files

  #35 opened 8 years ago by MaikStohn
  1

• Read / Write printer custom name

  #33 opened 8 years ago by MaikStohn
  0

• Implement Job Control (10 slots) + reprint

  #32 opened 8 years ago by MaikStohn
  0

• Question / Issue regarding multiple UP machines attached to a single computer

  #20 opened 9 years ago by adrianbear
  4

• Document settings for gcode generation

  #15 opened 9 years ago by dfyx
  18

• Question: Is there a maximum temperature

  #24 opened 9 years ago by adrianbear
  2

• Deceleration / Retraction issue (or user calibration required)

  #29 opened 9 years ago by adrianbear
  4

• Layer Positioning Issue

  #28 opened 9 years ago by adrianbear
  7

• Hardware or Transcoder X/Y lean issue on cylinders

  #18 opened 9 years ago by adrianbear
  56

• Question / Issue: convg tool travel moves

  #27 opened 9 years ago by adrianbear
  1

• Question / Issue : convg does not produce sensible gcode in preview

  #25 opened 9 years ago by adrianbear
  2

• Rename tools to be less generic

  #23 opened 9 years ago by dfyx
  2

• UPload stops at 30%

  #22 opened 9 years ago by companje
  10

• Question: G-Code 'flavour'

  #21 opened 9 years ago by companje
  4

• Enhancement Idea: Wrap into Virtual USB/COM port

  #17 opened 9 years ago by adrianbear
  6

• update ipk of upwifi

  #19 opened 9 years ago by DiegoGiovany
  2

• up3dwifisrv does not connect from OS X UP Studio 0.0.0.10

  #14 opened 9 years ago by kscheff
  3

• Version 0.4.0 appears to be broken

  #16 opened 9 years ago by adrianbear
  1

• Layers are not aligned / problems on Up Plus 2 / Up Box

  #11 opened 9 years ago by yanivg101
  28

• Not quite compatible with UPBox

  #13 opened 9 years ago by adrianbear
  1

• Error while sending umc code file

  #6 opened 9 years ago by yanivg101
  14

• first test

  #1 opened 9 years ago by Gitty-Hub
  10

• Error in transcode or upload?

  #9 opened 9 years ago by MasterOfDesaster666
  4

• Segmentation fault OSX when old firmware present

  #8 opened 9 years ago by kscheff
  1

• Flipped print

  #3 opened 9 years ago by kscheff
  5

• Multiple Objects with Slic3er crashed upload

  #5 opened 9 years ago by kscheff
  1