Questions and Schema available?
Closed this issue · 58 comments
Hi,
As I understand, you try to let an cc1101 (868mhz) work on the esp8266?
So it will act as an remote cul for fhem?
now I use an rpi zero with ser2net en an usb cul, so this should be better, if I understand it right
Is ther also a schema how to connect and cc1101? and do i have to program the cc1101 first?
Wich cc1101 should I buy?
regards Richard
Hi,
i have converted the official sources for CUL / CUNO to esp8266 in an arduino-environment. My last chips are connected to wlan. I can make photos and paste a schema how to connect the cc1101 this evening.
regards Manfred
Hi Manfred
I'm curious. Also what esp are you using? wemos d1? Also what cc1101 should I buy?
regards Richard
Hi Richard,
yes, i use wemos d1 mini or nodemcu. You also can use a single esp8266 with 4MB EEPROM, but i'am lazy and the wemos d1 mini brings the serial port for testing and the power supply with it. The CC1101 can be connected direct to the 3.3 V of esp8266. I use 8-in-1 pin layout (see wiki/hardware) but other layouts should also be ok.
regards Manfred
Hi,
I ordered een cc1101 868mhz, so I hope to have it in a couple of days
I already tried to compile, but I get an error
In file included from /home/richard/Arduino/libraries/cc1100/cc1100.h:13:0,
from /home/richard/Downloads/culfw-esp8266-master/culfw-esp8266/culfw-esp8266.ino:85:
/home/richard/Arduino/libraries/led/led.h:4:21: fatal error: arduino.h: No such file or directory
#include <arduino.h>
^
compilation terminated.
exit status 1
Error compiling for board WeMos D1 R1.
Hi,
in my Arduino 1.8.12 and "esp8266 by ESP8266 Community Version 2.6.3" it compiled without errors.
I installed it in Windows10. This is the problem, I think. I found a file Arduino.h, so I changed it in led.h
#include <Arduino.h>
Hi,
I have also arduino 1.8.12 en also esp8266 2.6.3. The problem is that in de led.h library the include #include <Arduino.h>. I don't have an arduino.h file in te libraries.
Where do you have de arduino.h file in a library dir?
regards Richard
Hi,
I found Arduino.h in C:\Users...\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266
It is in the core-directory of the board esp8266. I installed only the esp8266-package without changes.
Yes, that solves I have found the Arduino.h and changed in the led.h arduino.h to Arduino.h
Now it compiles more, but get a new error
Arduino: 1.8.12 (Linux), Board: "LOLIN(WEMOS) D1 R2 & mini, 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most compatible), 4MB (FS:2MB OTA:~1019KB), v2 Lower Memory, Disabled, None, Only Sketch, 921600"
/home/richard/Arduino/libraries/ethernet/ethernet.cpp: In constructor 'EthernetClass::EthernetClass()':
/home/richard/Arduino/libraries/ethernet/ethernet.cpp:26:30: error: no matching function for call to 'WiFiServer::WiFiServer()'
EthernetClass::EthernetClass() {
^
/home/richard/Arduino/libraries/ethernet/ethernet.cpp:26:30: note: candidates are:
In file included from /home/richard/.arduino15/packages/esp8266/hardware/esp8266/2.6.3/libraries/ESP8266WiFi/src/ESP8266WiFi.h:40:0,
from /home/richard/Arduino/libraries/ethernet/ethernet.h:10,
from /home/richard/Arduino/libraries/ethernet/ethernet.cpp:6:
/home/richard/.arduino15/packages/esp8266/hardware/esp8266/2.6.3/libraries/ESP8266WiFi/src/WiFiServer.h:50:3: note: WiFiServer::WiFiServer(uint16_t)
WiFiServer(uint16_t port);
^
/home/richard/.arduino15/packages/esp8266/hardware/esp8266/2.6.3/libraries/ESP8266WiFi/src/WiFiServer.h:50:3: note: candidate expects 1 argument, 0 provided
/home/richard/.arduino15/packages/esp8266/hardware/esp8266/2.6.3/libraries/ESP8266WiFi/src/WiFiServer.h:49:3: note: WiFiServer::WiFiServer(const IPAddress&, uint16_t)
WiFiServer(const IPAddress& addr, uint16_t port);
^
/home/richard/.arduino15/packages/esp8266/hardware/esp8266/2.6.3/libraries/ESP8266WiFi/src/WiFiServer.h:49:3: note: candidate expects 2 arguments, 0 provided
/home/richard/.arduino15/packages/esp8266/hardware/esp8266/2.6.3/libraries/ESP8266WiFi/src/WiFiServer.h:37:7: note: WiFiServer::WiFiServer(const WiFiServer&)
class WiFiServer : public Server {
^
/home/richard/.arduino15/packages/esp8266/hardware/esp8266/2.6.3/libraries/ESP8266WiFi/src/WiFiServer.h:37:7: note: candidate expects 1 argument, 0 provided
Multiple libraries were found for "WiFiUdp.h"
Used: /home/richard/.arduino15/packages/esp8266/hardware/esp8266/2.6.3/libraries/ESP8266WiFi
Not used: /home/richard/Downloads/arduino-1.8.12/libraries/WiFi
exit status 1
Error compiling for board LOLIN(WEMOS) D1 R2 & mini.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Hi Richard,
sorry, my mistake. I used WifiServer as class variable in EthernetClass. And I have not learned yet how to initialize an object in a class definition. So I inserted long time ago in packages\esp8266\hardware\esp8266\2.6.3\libraries\ESP8266WiFi\src\WifiServer.h under public:
WiFiServer();
and in WifiServer.cpp as additional constructor
WiFiServer::WiFiServer() : _port(0) , _addr(IP_ANY_TYPE) , _pcb(nullptr) , _unclaimed(nullptr) , _discarded(nullptr) { }
I think there is a better solution, but I don't know.
regards, Manfred
Hi Manfred,
It compiles right now. I also dit an upload to an wemos (without the cc1101 yet). Has the firmware an hostspot, or how should I connect it to my wifi ?
regards Richard
Hi Richard,
for the moment the credentials are in /library/private.h . That's a difference to the original CUNO. What devices do you plan to connect, what commands do you use in your implementation? If it is not yet implemented, the c-library from /clib has to be converted to c++ in the /library - directory and I can help to do this.
regards, Manfred
Hi,
I also have my cc1101 received. I looked at the log but it looks not yet ok, any idea what could be the issue?
2020.05.15 16:19:33 1: 192.168.180.50:2323 reappeared (cul)
2020.05.15 16:19:33 2: Setting cul fhtid from 0D2E2D07D3913D04320000060021656A55E43023B900070018146C070090876BF85611E92A001F4100FFFF to 4661
2020.05.15 16:19:33 3: cul: Possible commands: BCeFGKlMNqRTtuVWXxZ1
2020.05.15 16:19:33 1: 192.168.180.50:2323 disconnected, waiting to reappear (cul)
2020.05.15 16:19:17 1: 192.168.180.50:2323 reappeared (cul)
2020.05.15 16:19:17 2: Setting cul fhtid from 0D2E2D07D3913D04320000060021656A55E43023B900070018146C070090876BF85611E92A001F4100FFFF to 4661
2020.05.15 16:19:16 3: cul: Possible commands: BCeFGKlMNqRTtuVWXxZ1
2020.05.15 16:19:16 1: 192.168.180.50:2323 disconnected, waiting to reappear (cul)
2020.05.15 16:19:00 1: 192.168.180.50:2323 reappeared (cul)
2020.05.15 16:19:00 2: Setting cul fhtid from 0D2E2D07D3913D04320000060021656A55E43023B900070018146C070090876BF85611E92A001F4100FFFF to 4661
2020.05.15 16:19:00 3: cul: Possible commands: BCeFGKlMNqRTtuVWXxZ1
2020.05.15 16:18:59 1: 192.168.180.50:2323 disconnected, waiting to reappear (cul)
2020.05.15 16:18:43 1: 192.168.180.50:2323 reappeared (cul)
2020.05.15 16:18:43 2: Setting cul fhtid from 0D2E2D07D3913D04320000060021656A55E43023B900070018146C070090876BF85611E92A001F4100FFFF to 4661
2020.05.15 16:18:43 3: cul: Possible commands: BCeFGKlMNqRTtuVWXxZ1
2020.05.15 16:18:39 1: 192.168.180.50:2323 disconnected, waiting to reappear (cul)
2020.05.15 16:18:23 1: 192.168.180.50:2323 reappeared (cul)
2020.05.15 16:18:23 2: Setting cul fhtid from 0D2E2D07D3913D04320000060021656A55E43023B900070018146C070090876BF85611E92A001F4100FFFF to 4661
2020.05.15 16:18:23 3: cul: Possible commands: BCeFGKlMNqRTtuVWXxZ1
looks like setting fhtid (housecode) , it fails?
telnet 192.168.180.50 2323
Trying 192.168.180.50...
Connected to 192.168.180.50.
Escape character is '^]'.
V
V 1.67 CUL868
T01
FFFF
T01 4661
Connection closed by foreign host.
Hi Richard,
i think, the messages up to "disconnected, waiting to reappear (cul)" are ok, but then it seems that the esp8266 boots. Can you see any failure in the arduino serial monitor?
My Settings in Arduino are:
CPU Frequency: "80 MHz"
Flash Size: "4MB (FS:2MB OTA:~1019KB)"
...
Programmer: "AVRISP mkll"
Manfred , looks like a crash, output below. I have the same settings in arduino
The output is when fhem starts
UDP 1, TCP 0 on 192.168.180.50:2323
Channel 13
CC1100_PARTNUM 0x00: 0
CC1100_VERSION 0x14: 14
UDP 1, TCP 0 to 192.168.180.73:49308
V
V 1.67 CUL868
send to client 0 192.168.180.73:49308
send to client 0 192.168.180.73:49308
?
? (? is unknown) Use one of B C e F G K l M N q R T t u V W X x Z 1
send to client 0 192.168.180.73:49308
send to client 0 192.168.180.73:49308
UDP 1, TCP 0 to 192.168.180.73:49322
UDP 1, TCP 0 on 192.168.180.50:2323
Channel 13
CC1100_PARTNUM 0x00: 0
CC1100_VERSION 0x14: 14
UDP 1, TCP 0 to 192.168.180.73:49326
V
V 1.67 CUL868
send to client 0 192.168.180.73:49326
send to client 0 192.168.180.73:49326
?
? (? is unknown) Use one of B C e F G K l M N q R T t u V W X x Z 1
send to client 0 192.168.180.73:49326
send to client 0 192.168.180.73:49326
X21
0D2E2D07D3913D04320000060021656A55E43023B900070018146C070090876BF8561
send to client 0 192.168.180.73:49326
1E92A001F4100T01
FFFF
send to client 0 192.168.180.73:49326
send to client 0 192.168.180.73:49326
T014661
Exception (0):
epc1=0x40202ba8 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000000
>>>stack>>>
ctx: cont
sp: 3ffffb30 end: 3fffffc0 offset: 01a0
3ffffcd0: 3ffffd70 0000003f 00000020 401002ec
3ffffce0: 0000000f 0000005a 3fffc248 4000050c
3ffffcf0: 400043da 00000030 00000016 ffffffff
3ffffd00: 400044ab 3fffc718 3ffffdf0 08000000
3ffffd10: 60000200 08000000 00000003 00000000
3ffffd20: 0000ffff 00042035 00002035 003fb000
3ffffd30: 00000001 3fff0c40 3ffee5c3 00000030
3ffffd40: 3ffffdf0 3ffffdc0 00000008 00000027
3ffffd50: 3fff0c60 00000008 3ffffd70 40207ed4
3ffffd60: 3ffffd00 00000002 0000000b 402082ac
3ffffd70: 6e65730a 6f742064 696c6320 20746e65
3ffffd80: 39312030 36312e32 38312e38 33372e30
3ffffd90: 3339343a 000a3632 00000020 40100d07
3ffffda0: 00000238 00000047 00000047 40100a7c
3ffffdb0: 00000005 00000000 00000020 401001f0
3ffffdc0: 00000005 00000000 00000005 40101820
3ffffdd0: 00000000 4000444e 3ffec730 401001f0
3ffffde0: 00000002 40105c03 00000001 60000200
3ffffdf0: 00000002 4000410f 00001001 00000005
3ffffe00: 3fffc718 40004a3c 000003fb 00000001
3ffffe10: 3fffc718 40105e94 000003fb 00000100
3ffffe20: 40207d5a 3fff0c28 00002200 00000001
3ffffe30: 00000001 00004288 00000002 40207c9f
3ffffe40: 3fff0c26 00000001 3ffee880 40202495
3ffffe50: 3ffe955c 2c9f0300 4000050c 402024c0
3ffffe60: 40102778 3ffee880 3ffee88c 402024dc
3ffffe70: 40204281 00000030 00000010 402034e2
3ffffe80: 00614601 0000016a 0000016a 40100a7c
3ffffe90: 0000000d ffffffff 00000020 3ffee648
3ffffea0: 3ffee5c2 0000000b 00000054 402010af
3ffffeb0: 00000000 00000000 00000001 40201a19
3ffffec0: 00000000 0000000a 00000064 3ffee6d3
3ffffed0: 3ffee648 3ffee644 3ffee87b 40201aa7
3ffffee0: 0000000d 00000000 3fff1664 40208d5d
3ffffef0: 00000000 3fff0be0 3ffeeae0 3fff0b84
3fffff00: 00000000 3fff0be0 3ffeeae0 40205934
3fffff10: 00000031 00000010 3fffff3d 40208421
3fffff20: 4020b050 00000000 00001388 40209ca1
3fffff30: 00000000 00000000 4020b1c0 49b4a8c0
3fffff40: 3ffe8700 3fffff50 00000008 3fff0d8c
3fffff50: 4000ffc8 00000001 00000002 401004e9
3fffff60: 00000000 cbd06d81 3fff0b84 40208d47
3fffff70: 3fff0b9c 0000000a 00000000 3fff0d8c
3fffff80: 3fffdad0 00000000 3fff0c60 3fff0d8c
3fffff90: 3fffdad0 00000000 3fff0d4c 40201589
3fffffa0: feefeffe 00000000 3fff0d4c 40208e08
3fffffb0: feefeffe feefeffe 3ffe84e8 40100fcd
<<<stack<<<
?�⸮⸮�1⸮`⸮⸮eeprom_init
ewb(EE_MAGIC_OFFSET)
eeprom_init ok
It seems that there is a conflict between Timer-Interrupt and HardwareSerial. I will test it with a new esp8266.
From the exception decoder:
Exception 0: Illegal instruction
PC: 0x40202ba8: CLOCKClass::IsrHandler() at C:\usr\arduino-1.8.12\libraries\clock\clock.cpp line 28
EXCVADDR: 0x00000000
Decoding stack results
0x401002ec: timer0_isr_handler(void*) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\core_esp8266_timer.cpp line 89
0x40207ed4: HardwareSerial::write(unsigned char const*, unsigned int) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266/HardwareSerial.h line 162
0x402082ac: Print::printf(char const*, ...) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\Print.cpp line 74
0x40100d07: free(void*) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\umm_malloc\umm_malloc.cpp line 349
0x40100a7c: umm_free_core(void*) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\umm_malloc\umm_malloc.cpp line 308
0x401001f0: ets_post(uint8, ETSSignal, ETSParam) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\core_esp8266_main.cpp line 160
0x401001f0: ets_post(uint8, ETSSignal, ETSParam) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\core_esp8266_main.cpp line 160
0x40207d5a: EspClass::flashEraseSector(unsigned int) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\Esp.cpp line 585
0x40207c9f: EEPROMClass::commit() at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\libraries\EEPROM\EEPROM.cpp line 134
0x40202495: FNCOLLECTIONClass::ewc(bool) at C:\usr\arduino-1.8.12\libraries\fncollection\fncollection.cpp line 58
0x402024c0: FNCOLLECTIONClass::ewb(unsigned char, unsigned char, bool) at C:\usr\arduino-1.8.12\libraries\fncollection\fncollection.cpp line 51
0x402024dc: FNCOLLECTIONClass::ewb(unsigned char, unsigned char) at C:\usr\arduino-1.8.12\libraries\fncollection\fncollection.cpp line 42
0x40204281: RfRouterClass::task() at C:\usr\arduino-1.8.12\libraries\rf_router\rf_router.cpp line 189
0x402034e2: FHTClass::fhtsend(char*) at C:\usr\arduino-1.8.12\libraries\fht\fht.cpp line 109
0x40100a7c: umm_free_core(void*) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\umm_malloc\umm_malloc.cpp line 308
0x402010af: fhtsend(char*) at C:\Users\manfred\Documents\GitHub\culfw-esp8266\culfw-esp8266/culfw-esp8266.ino line 240
0x40201a19: TTYdataClass::callfn(char*) at C:\usr\arduino-1.8.12\libraries\ttydata\ttydata.cpp line 24
0x40201aa7: TTYdataClass::analyze_ttydata(unsigned char) at C:\usr\arduino-1.8.12\libraries\ttydata\ttydata.cpp line 58
0x40208d5d: optimistic_yield(uint32_t) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\core_esp8266_main.cpp line 128
0x40205934: EthernetClass::Task() at C:\usr\arduino-1.8.12\libraries\ethernet\ethernet.cpp line 316
0x40208421: Print::printNumber(unsigned long, unsigned char) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\Print.cpp line 267
0x40209ca1: uart_write(uart_t*, char const*, size_t) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\uart.cpp line 509
0x401004e9: __digitalWrite(uint8_t, uint8_t) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\core_esp8266_wiring_digital.cpp line 84
0x40208d47: optimistic_yield(uint32_t) at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\core_esp8266_main.cpp line 127
0x40201589: loop() at C:\Users\manfred\Documents\GitHub\culfw-esp8266\culfw-esp8266/culfw-esp8266.ino line 509
0x40208e08: loop_wrapper() at C:\Users\manfred\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\cores\esp8266\core_esp8266_main.cpp line 177
Hi,
I'm using an wemos d1 mini v3 .
I'm also using a wemos d1 mini v3 and now testing with a wemos d1 mini v2. Both are without errors.
If it is a timing problem, I optimized the EthernetClass::task(): no debugging messages on serial and a yield() to give the chip time to run. New version is online.
regards, Manfred
looks like its worse??
UDP 1, TCP 0 on 192.168.180.50:2323
Channel 13
CC1100_PARTNUM 0x00: 0
CC1100_VERSION 0x14: 14
Exception (0):
epc1=0x40202ba8 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000000
>>>stack>>>
ctx: cont
sp: 3ffffb70 end: 3fffffc0 offset: 01a0
3ffffd10: 3fff1f84 00000000 3fffc228 401002ec
3ffffd20: 4000050c 3fff1f84 3fffc248 4000050c
3ffffd30: 400043e6 00000030 00000016 ffffffff
3ffffd40: 400044ab 3fffc718 3ffffe30 08000000
3ffffd50: 60000200 08000000 08000000 00000000
3ffffd60: 0000ffff 00042035 00002035 003fb000
3ffffd70: 00000001 3fff0bb0 3ffee533 00000030
3ffffd80: 00007fff 01bba57c 3ffed070 40102594
3ffffd90: 3ffe94cc 00000000 00000000 40101820
3ffffda0: 00007fff 01bba57c 40102a56 00000100
3ffffdb0: 3ffe94cc 7fffffff 00002200 00000001
3ffffdc0: 00000001 00004288 00000002 00040000
3ffffdd0: 3ffe94cc 40102927 00000000 01bba57c
3ffffde0: 3ffe9490 2c9f0300 4000050c 3fffc278
3ffffdf0: 00000005 00000000 00000020 401001f0
3ffffe00: 4020a272 00000030 00000005 40101820
3ffffe10: 00000000 4000444e 3ffec6a0 4022b395
3ffffe20: 00000002 40105c03 00000001 60000200
3ffffe30: 00000002 4000410f 00001001 00000005
3ffffe40: 3fffc718 40004a3c 000003fb 00000001
3ffffe50: 3fffc718 40105e94 000003fb 00000100
3ffffe60: 40207b66 3fff0b98 00002200 00000001
3ffffe70: 00000001 00004288 00000001 40207ac3
3ffffe80: 3fff0b96 00000001 3ffee7f0 40202495
3ffffe90: 3ffe949c 2c9f0300 4000050c 402024c0
3ffffea0: 40102778 3ffee7f0 3ffee7fc 402024dc
3ffffeb0: 40208c11 00000030 00000010 402034e2
3ffffec0: 00614601 0000016a 0000016a 40100a7c
3ffffed0: 00000000 00000000 00000000 3ffee5b8
3ffffee0: 3ffee532 0000000b 00000054 402010af
3ffffef0: 00000000 3fffdad0 3fff0cfc 40201a19
3fffff00: 007a1200 8eddacab 00000000 3ffee643
3fffff10: 3ffee5b8 3ffee5b4 3ffee7eb 40201aa7
3fffff20: 0000000d 00000000 3fff15d4 40208b53
3fffff30: 00000000 3fff0b50 3ffeea50 3fff0af4
3fffff40: 00000000 3fff0b50 3ffeea50 402057c0
3fffff50: 4020ae40 00000000 00001388 401004e9
3fffff60: 00000000 00000000 3ffee700 40208b53
3fffff70: 00000000 3fff0af4 00000000 3fff0cfc
3fffff80: 3fffdad0 00000000 3fff0bd0 3fff0cfc
3fffff90: 3fffdad0 00000000 3fff0cbc 40201589
3fffffa0: feefeffe 00000000 3fff0cbc 40208c14
3fffffb0: feefeffe feefeffe 3ffe84e8 40100fcd
<<<stack<<<
?�)⸮L⸮⸮⸮⸮⸮⸮eeprom_init
ewb(EE_MAGIC_OFFSET)
eeprom_init ok
Same error, something in the interrupt handler. Today I make a break, bye.
ok, later
Good morning,
esp8266 use the flag ICACHE_RAM_ATTR in interrupt routines. So I set this in the CLOCKClass. Even though I had no problems on the third chip, I have committed this change.
Hi,
I don't see commands while starting fhem arduino serial monitor now. But I also don't get errors in my fhem log
And paring my fht8v, I got a signal, that it looks likt that works. Only my S300, I don't receive, and on my traditional cul I can.
UDP 1, TCP 0 on 192.168.180.50:2323
Channel 13
CC1100_PARTNUM 0x00: 0
CC1100_VERSION 0x14: 14
I stopped most of the Serial.print's because I thought there was the problem in timing.
Now I activated these debugging infos in ethernet.cpp and you will see the in- and outgoing traffic in arduino monitor.
I activated also now HAS_TX3 what is activated in CUL3 and deactivated HAS_FTZ what was my own (now obsolet) alarm system.
Hi,
Ok got logging back. Looks like sending works (can pair fht8v and decalc) not yet change valve, but receiving doesn't work (fs20 remote and s300temp/hum tested). What pin is the RX on the cc1101 and esp?
UDP 1, TCP 0 to 192.168.180.73:52284
V
V 1.67 CUL868
?
? (? is unknown) Use one of B C e F G K l M N q R T t u V W X x 1
X21
0D2E2D07D3913D04320000060021656A55E43023B900070018146C070090876BF85611E92A001F4100T01
1234
T011234
T1434002f00
T1434002f00
T1434000A00
Hi,
the connection is
- SPI-interface MOSI/MISO,
Wemos D1 - CC1101
D5 - 4 SCK
D6 - 5 MISO
D7 - 3 MOSI
D8 - 8 CSN
- direct outputs GDO0 and GDO2 of CC1101
Wemos D1 - CC1101
D1 - 6 GDO2
D2 - 7 GDO0
For completeness the power connection of CC1101
Wemos D1 - CC1101
V3.3 - 1 V3.3
GND - 2 GND
Caution: the above post is for mine CC1101 correct, but there are other modules in trade with other pin assignments. Only the naming is always ok.
I checked again the pinout an reconnect it on my breadboard, still the same.
I ordered these
https://www.makershop.de/module/funk/cc1101-868-mhz/
So pins should be the same as you mentioned, Is de miso the recveive pin?
Hi
I had a nano, so to check I build the nanocul with the cc1101, and this one worked an received the signals. So I think still something missing in the software of the esp8266 maybe?. What components do you use that work? fs20 ? Fht8v? or?
regards Richard
Hi,
Could it be this one?
fs20, needs slowrf mode, and that must be set with
f[]
"fast" (250kBaud) rf txmit via CC1101 packet handling.
First switch both devices to fastrf mode with "fr", then send data: fs<data>, e.g. fsHallo
Reset to "SlowRF": fx, followed by X21
It can be used to "sniff" RFR packets
http://culfw.de/commandref.html#cmd_F
Looks like when I start fhem, there is also an unkown command, just before X21
UDP 1, TCP 0 on 192.168.180.50:2323
Channel 13
CC1100_PARTNUM 0x00: 0
CC1100_VERSION 0x14: 14
UDP 1, TCP 0 to 192.168.180.60:40184
V
V 1.67 CUL868
?
? (? is unknown) Use one of B C e F G K l M N q R T t u V W X x 1
X21
0D2E2D07D3913D04320000060021656A55E43023B900070018146C070090876BF85611E92A001F4100T01
1234
Hi,
I use only FS20 and in 433 MHz Intertechno. The pin layout seems same as mine.
The following is not implementet from CUL 3,
HAS_ASKSIN, HAS_ASKSIN_FUP, HAS_MORITZ, HAS_ESA, HAS_TCM97001, HAS_UNIROLL, HAS_MEMFN, HAS_SOMFY_RTS, HAS_BELFOX
Is de miso the recveive pin?
It's one of the SPI-interface ("master in, slave out") where master is the ESP8266 and slave the CC1101.
Looks like when I start fhem, there is also an unkown command, just before X21
FHEM sends the "?" to get all commands of the CUL, thats all right.
My log for FS20 is
CC1100_PARTNUM 0x00: 0
CC1100_VERSION 0x14: 14
UDP 1, TCP 0 to 192.168.75.126:60788
V
V 1.67 CUL868
?
? (? is unknown) Use one of B C e F G K l M N q R T t u V W X x 1
X21
0D2E2D07D3913D04320000060021656A55E43023B900070018146C070090876BF85611E92A001F4100T01
2969
T012969
F29690000
F29690011
... and it run
My code starts with F..., so it is FS20-code and you have T..., what is FHT-code. I looked at the code for fht. I can't test it, but it's the original code from CUL and there is nothing commented out for ESP8266.
Do you receive also fs20 code? Or only send? My fs20 remote doesn,t work either.
I was thinking for troubleshooting, the following options:
- cul1101 is ok (checked with nancul en this works)
- wemos d1 mini (maybe miso pin esp d6 defect , incoming. (check with other software on the esp that uses D6) Also order a new wemos d1 mini v3.
- compile isue maybe? Can you provide me a binary of your compiled version, use ssid: test and wpa2key: test . I create for test this ssid
- Issue in software with MISO pin for incoming rf traffic?
regards Richard
Hi,
I used a remote FS20 S20, but this remote is defect so i didn't notice that Wifi uses in ESP8266 a timer. This breaks the CUL-receive-function. Timer 1 is only in use for silence recognition and in the moment i think ist is a possible, relative quick change in the code.
tested the new code,
not yet receiving some on from my remote
V 1.67 CUL868
?
? (? is unknown) Use one of B C e F G K l M N q R T t u V W X x 1
X21
0D2E2D07D3913D04320000060021656A55E43023B900070018146C070090876BF85611E92A001F4100T01
1234
T011234
60000004 loop 60000000 - 7500 - 60 ticks 7540 T1 7031 T1c 0 gdo2INT 1 GDO0t 0 GDO2t 0
80000023 loop 80000018 - 10000 - 80 ticks 10040 T1 7071 T1c 0 gdo2INT 0 GDO0t 0 GDO2t 0
100000007 loop 100000002 - 12500 - 100 ticks 12540 T1 6963 T1c 0 gdo2INT 0 GDO0t 0 GDO2t 0
120000035 loop 120000031 - 15000 - 120 ticks 15040 T1 6976 T1c 0 gdo2INT 0 GDO0t 0 GDO2t 0
140000028 loop 140000023 - 17500 - 140 ticks 17540 T1 7007 T1c 0 gdo2INT 0 GDO0t 0 GDO2t 0
160000023 loop 160000018 - 20000 - 160 ticks 20040 T1 7031 T1c 0 gdo2INT 0 GDO0t 0 GDO2t 0
180000038 loop 180000033 - 22500 - 180 ticks 22540 T1 6792 T1c 0 gdo2INT 0 GDO0t 0 GDO2t 0
Hi Richard,
hard to understand, what to do with interrupts on esp8266. But now I have reactivated my old FS20-S20 and I get the received keys in FHEM.
Hope it is also functioning for you.
Hi Manfred,
Looks like it's working. The remote works, and he fht are autocreating. thnx for the support. I'm going to test eveything works as expected en let you know
UDP 1, TCP 0 on 192.168.180.50:2323
Channel 13
CC1100_PARTNUM 0x00: 84
CC1100_VERSION 0x14: 60
UDP 1, TCP 0 to 192.168.180.60:42618
V
V 1.67 CUL868
?
? (? is unknown) Use one of B C e F G K l M N q R T t u V W X x 1
X21
0D2E2D07D3913D04320000060021656A55E43023B900070018146C070090876BF85611E92A001F4100T01
FFFF
T011234
F1983000030
F1983001100
F1983010000
F1983011100
F1983020000
F1983021100
F1983030000
F1983031100
F1983000000
F1983010000
F1983020000
F1983030000
T486100260000
T476100260000
T486100260000
F19830100
T476100260005
K410072584F
Tested some, could it be that sending now fails? Can't pair with the fht8v anymore
another question, could you change the hostname . Now it takes EPS-mac adrees. Should be more nice to call it culfw-esp8266
regards RIchard
Manfred,
I'm not sure, I think I broke my cc1101 with my own fault, I ordered 2 new esp8266 and a cc1101
So I'm not sure if it was a problem sending again.
Now I can't send and receive nothing. Hopefully in couple days...
So still the question about other hostname, and also the blinking blue led, should be nice to have it off ( if it works it comes in the bedroom, and that doesn't like my wife..(
Hi,
my sending still works and it is a pity to hear from your broken CC1101. About the hostname: thats the standard from WiFi-class and first I plan now to connect my OneWire to the ESP8266. After that the complete wifi- and ip-settings must set in the eeprom, not hardcoded.
The blinking blue led is easy: there is a command in FHEM: "set <cun> led 00" (null null). ;)
regards, Manfred
Hi,
Led works, I checked my cc1101 , on the nanocul this one is still ok. Looks like de ports on the esp are... I hope to have some spare later this week. I let you know.
Manfred,
Today I received the new wemos d1 mini v3 . I soldered everything, and tested, and everything works.
I also ordered today new thermstat max! and max! wall mounted thermostat. As i understand I must put a cul in moritz mode. You said that moritz code is not yet in the culfw-esp8266. Will you enable this, so I can test this?
Great. I'm glad about that.
To the topic MAX!: it's implemented, but I don't own MAX!, so I can not test it. But I wanted anyway buy a thermostat for fhem. What do I need? For the beginning 1 radiator thermostat and 1 wall mounted thermostat?
Hoi Manfred,
Not yet everything works, some issues with fh8v. Pairing works but setting the valve nothing happens. The command is on the espcul but the valve doesn't change. I must tes t some to get more details.
For the MAX, I ordered just that an radiator thermostat and a wall mounted thermostat. I hope tot get them today
Hi ,
It looks like when I pair and set de valve it works but later it doesn't
As I read the documents, there is also a timer for he time slots, could this be an issue?
http://culfw.de/commandref.html#cmd_T
T11
Return the time till the next 8v timeslot (seconds, hex)
manfred , looks like there is a connection with the fht8v and the espcul, because if I shutdown the espcul, the fht8v make a sound every time. So it looks like the commmand For setting (Maybe reading also) the valve has in issue , in timing or buffer?
Regards richard
If the espcul us afsin online and afther a while you hear a beep that they see each other than the valve sets it directly correct on the fht8v , but after then it will not change
Hi Richard, I found a good page (but only in german, hope google helps) https://wiki.fhem.de/wiki/Kommunikationsprobleme_mit_FHT . FHT devices seems to be a little difficult.
Especially the command get espcul raw T02 could show, if there are problems in the acknowledgement.
Hi,
That is mostly communication with FHT80b. I do direct comminction with fht8v
https://wiki.fhem.de/wiki/FHT_8v_direkt_ansprechen
It looks like if i send a couple of time with raw it works but after 3 a 4 times it stops working. If I do a repair again the value comes. SO it looks like communication lost or buffer issue.
The stange thing is that with a normal cul (busware) it works perfect (same software version)
I also did when it doesn't work get cul raw T02, and I get no answer, so nothing in buffer
I have received the max! radiarothermostat and the wall thermostat, and binding on the cul works. So I hope you als got yours soon, so the espcul can also the (max) moritz mode.
manfred,
I found this with issue of the CUNO and fht8v , looks like the same that happens here
pretty strange, when moritz compiled with it, it looks like the fht8v stays working (changed 10 times the value). I'm going to test it a couple days
it is still working, closing this issue. I do for other thing new issues.