/Stealth_Bed_Front

GNU General Public License v3.0GPL-3.0

V0 Stealth Bumper

A low-poly front bumper for your Voron 3D Printer

Compatible with:

  • V0 Kirigami Bed.
  • Salad Fork / Tri-Zero / Pandoras Box
  • anything with an extrusion to attach it to

Supports the Rainbow Barf Logo LED or a Neopixel Mini Button.

Render

BOM

Item Qty.
M3x5x4 Heatset Insert 2
M3 Hex Nut 2
M3x6 BHCS 4
Neopixel Mini Button 1
Rainbow Barf Logo LED 1

Note: Only one LED Option is required. Either the Neopixel Mini Button, or the Rainbow Barf Logo LED

Printing

  • Use standard Voron print settings for all parts.
  • Print the main_body stl for your printer.
  • use a clear filament for parts with the [c] prefix.
  • for Rainbow Barf, print [c]_rainbow_barf_diffuser.stl and rainbow_barf_carrier.stl
  • for Neopixel Mini Button print [c]_neopixel_button_diffuser.stl and neopixel_button_carrier.stl

Assembly

  • Remove the 2 supports inside the hexagonal hole of main_body
  • Install 2 heatset inserts into the back of main_body
  • Press the clear diffuser into logo_insert
  • Press logo_insert into main_body
  • Press LED (Rainbow Barf, or Neopixel Mini Button) into the appropriate carrier. Solder wires either before, or after if necessary. (you may not be able to fit a jst connector through the carrier)
  • Fit the carrier to the back of main_body and fasten with 2 M3x6 BHCS
  • Attach main_body to the front of the kirigami bed frame, using 2 M3 hex nuts and 2 M3x6 BHCS

Credits

  • Cameron at LDO Motors for the initial work on fitting a StealthBurner diffuser in the design
  • WhoppingPochard and VinnyCordeiro for the Rainbow Barf Logo LED