MaslowCNC/GroundControl
This is the Ground Control software used to control the Maslow CNC Machine
PythonGPL-3.0
Issues
- 2
- 8
- 2
- 2
- 7
Caibration Step9 - make the pictures buttons
#578 opened - 7
- 4
- 3
- 4
Simulation text question
#568 opened - 1
- 8
- 20
- 3
- 4
Add an Alarm Unlock Button
#557 opened - 1
- 0
- 3
Window loads with large error
#550 opened - 2
- 6
Show default value next to each setting
#543 opened - 2
- 0
Delay on manual Z change
#538 opened - 3
- 7
- 1
- 9
- 3
- 13
Export $ Commands to a Text File
#523 opened - 7
Walk Through for Initial Setup?
#521 opened - 1
If No groundcontrol.ini file is found, user gets warning about unable to locate gcode file
#520 opened - 7
- 5
- 8
Double character in
#507 opened - 0
New light UI not showing files
#505 opened - 16
listSerialPorts slow with bluetooth enabled.
#504 opened - 12
Rotate 1 deg CW/CCW not really 1 deg
#500 opened - 5
- 9
Add Stop Button to Z-Axis Control Menu
#490 opened - 8
after PR#485, groundcontrol fails to run
#486 opened - 5
- 1
- 0
- 3
- 1
Typo on step 8 of calibration
#470 opened - 0
Update pictures for calibration process
#468 opened - 7
- 4
Triangular Calibration Drops Sled to Floor
#465 opened - 19
Z motor auto shut down.
#463 opened - 3
- 5
- 3
Setup Machine Dimensions - Step 10 of 10
#455 opened