MikeBland/mbtx

Some USBASP programmers doesn't flash firmware.

nppc opened this issue · 5 comments

nppc commented

It's seems, that some versions of USBASP firmware need power cycle of the programmer before each use. But eepe uses USBASP programmer twice while flashing firmware to TX. First time it reads EEPROM, and right after reaiding eeprom, it starts writing... and fails on some USBASP.

So, as a workaround, can you please add a check box that can be unchecked to prevent EEPROM reading prior to flashing firmware?

Thanks a lot.

MikeBland commented

This will be in the next release/test version.

nppc commented

Oh, thank you Mike! :)

nppc commented

Ah, thanks! Probably can test it today late evening...
Pavel

2016-05-25 12:49 GMT+02:00 MikeBland notifications@github.com:

Test version (for Windows) posted here:
http://openrcforums.com/forum/viewtopic.php?f=5&t=4598&p=64969#p64969

—
You are receiving this because you authored the thread.
Reply to this email directly or view it on GitHub
#21 (comment)

nppc commented

Hi Mike!
I have tested your test version of eepe with eeprom pre-read disabled and
it works now with my usbasp.

Thanks a lot! will close my issue on github.

Pavel

2016-05-25 14:23 GMT+02:00 Pavel Palonen pavel.palonen@gmail.com:

Ah, thanks! Probably can test it today late evening...
Pavel

2016-05-25 12:49 GMT+02:00 MikeBland notifications@github.com:

Test version (for Windows) posted here:
http://openrcforums.com/forum/viewtopic.php?f=5&t=4598&p=64969#p64969

—
You are receiving this because you authored the thread.
Reply to this email directly or view it on GitHub
#21 (comment)